With today's advances in Refractive Surgery available in the United States, more damaged people are coming forward with complications from this procedure. Most complaints are quoted as incompetence, greed, 'assembly line' style surgical suites, lies to the patient, or the simple lack of caring by the doctor. First and foremost of complaints are the lasers! Just to name a few:

Blades getting stuck, broken, or RE-USED (these are supposed to be SINGLE USE BLADES);
Loss of the LASIK flaps (some have adhered to the microkeratome, some have been found ON THE FLOOR!);
Miscalculations by the doctors or techs;

There's no good reason why Americans should be subjected to surgery with lasers inferior to those currently being used in Europe. Have a lasik evaluation and ask the doctor when he'll have a new laser as good as the iVIS from Italy and a topographer equal to the Precisio. Don't let him tell you that the differences are not substantial, because they ARE. Don't settle for inferior equipment when your eyes are at stake. Your vision is too important.

Anyone considering refractive surgery should wait for that technology to become available in the United States. This is most important for patients who've already had refractive surgery and need irregular astigmatism, decentrations, small optical zones and other messes cleaned up. It appears that two doctors are at the forefront at helping those with bad outcomes who seek surgical remediation:

Dr. Ming Wang in Nashville, who is working on obtaining FDA approval* to import the iVIS laser into this country, and Dr. Aleks Stojanovic in Norway, who is already using the newer, better laser.

For more information, see the iVIS TECHNOLOGIES WEBSITE

If I were considering LASIK now, I'd wait because this technology is far superior to the crappy lasers in the U.S. right now. Not to mention our topographers that cannot see the central 1-2 mm of the cornea because the camera is in the way. Who in their right mind can honestly offer a custom treatment when data for the central cornea is being extrapolated?

* As mentioned throughout this section of my website, the FDA has done very little to help those damaged by Refractive Surgery. Apparently, there are no financial interests to the lackeys in the FDA by helping these casualties.

Advanced Medical Optics to buy IntraLase for $808 million

 

January 8, 2007, Santa Ana, CA--Advanced Medical Optics, a global ophthalmic surgical and eye care products company that bought eye-laser pioneer VISX in 2005, is further expanding its market presence in laser vision correction. The company will pay $808 million in cash to purchase IntraLase Corporation, the leading provider of ultrafast laser systems for LASIK.

 

Read the full article HERE

 
MORE LINKS: 
 

Advanced Medical Optics (AMO)

Intralase FS Laser

Problems have occurred with the Intralase FS Lasers

SOURCE

Type in "Intralase" for the brand name to pull up MDRs filed on Intralase. The product code is GEX (you will get other reports not related to Intralase).

From the MDRs:


SOURCE

THE INTRALASE FS LASER WAS USED TO CREATE A CORNEAL FLAP FOR BILATERAL MONOVISION LASIK SURGERY. THE FLAPS ON BOTH EYES WERE CREATED SUCCESSFULLY. AFTER THE FLAP WAS CREATED ON THE SECOND (LEFT) EYE, THE SUCTION WAS RELEASED AND THE SUCTION RING ASSEMBLY WAS REMOVED FROM THE EYE. THE BEAM DELIVERY DEVICE (BDD) WAS LIFTED OFF THE EYE WHILE THE SURGEON REPLACED THE CORNEAL FLAP. WHILE THE BDD WAS MOVING UPWARDS, DOWNWARD MOTION WAS INADVERTENTLY INITIATED. THE SURGEON AND ASSISTING SURGEON ATTEMPTED TO REVERSE DIRECTION OF THE BDD USING THE JOYSTICK, HOWEVER THE JOYSTICK BROKE OFF OF THE UNIT AS A RESULT OF EXCESSIVE FORCE. THE BDD DID NOT CONTACT THE EYE, BUT DID MAKE CONTACT WITH THE PT'S LEFT TEMPORAL PERIORBITAL AREA. THERE WAS NO VISIBLE OR DISCERNABLE INJURY TO THE PT, I.E., LESIONS OR CONTUSIONS; HOWEVER, AT THE 10-DAY POST-OPERATIVE VISIT, MILD YELLOWING IN THE AREA WAS NOTED BY THE SURGEON, INDICATING THAT BRUISING HAD OCCURRED. NO CONTACT WAS MADE WITH THE EYE, AND THE PT'S UNCORRECTED VISUAL ACUITY IMPROVED FROM 20/400 PRE-OPERATIVELY TO 20/70 ON THE FIRST DAY OF POST-OPERATIVE.


SOURCE

THE JOYSTICK OF THE INTRALASE FS LASER WAS NOT WORKING PROPERLY. THE JOYSTICK, WHICH CONTROLS MOVEMENT OF THE DELIVERY SYSTEM, MOVED IN THE OPPOSITE DIRECTION. SPECIFICALLY, WHEN DOWNWARD MOVEMENT WAS REQUESTED, THE DELIVERY SYSTEM MOVED UP; AND WHEN UPWARD MOVEMENT WAS REQUESTED, THE DELIVERY SYSTEM MOVED DOWN. THIS MALFUNCTION WAS DETECTED PRIOR TO SURGERY, THERE WAS NO PATIENT INVOLVEMENT OR INJURY. UPWARD MOVEMENT DOES NOT POSE ANY PATIENT RISK, HOWEVER UNANTICIPATED DOWNWARD MOVEMENT OF THE DELIVERY SYSTEM HAS THE POTENTIAL TO CAUSE CORNEAL TRAUMA.


SOURCE

DURING LASIK SURGERY IN 2002, THE INTRALASE FS LASER WAS USED TO CREATE THE CORNEAL FLAP AND THE INTRALASE FS DISPOSABLE PATIENT INTERFACE (PI) WAS USED TO APPLANATE THE CORNEA PRIOR TO FLAP CREATION. DURING FLAP CREATION, THERE WAS A SMALL AREA OF INEFFECTIVE PHOTODISRUPTION THAT REQUIRED ADDITIONAL MANIPULATION TO LIFT THE FLAP. THIS EVENT DID NOT RESULT IN ANY PATIENT INJURY AND THE PATIENT'S POST-OPERATIVE VISUAL ACUITY IS 20/20. AFTER REVIEWING A VIDEOTAPE OF THE SURGERY, THE SURGEON NOTICED THERE WAS A POSSIBLE DEFECT ON THE SURFACE OF THE PATIENT INTERFACE APPLANATION LENS. THE POSSIBLE LENS DEFECT WAS IN THE SAME LOCATION AS THE AREA OF INEFFECTIVE PHOTODISRUPTION. THIS EVENT IS BEING REPORTED AS A MALFUNCTION MDR BECAUSE IF IT RECURRED, IT COULD LEAD TO A CORNEAL TEAR AND POSSIBLE SURGICAL INTERVENTION.


SOURCE

DURING LASIK SURGERY IN 2002, THE INTRALASE FS LASER WAS USED TO CREATE THE CORNEAL FLAP. DURING THE PROCEDURE, A SCREW HAD LOOSENED FROM THE DELIVERY SYSTEM AREA AND THE WASHER LANDED ON THE PATIENT'S FOREHEAD. THE PATIENT WAS NOT INJURED AND THE SURGERY CONTINUED WITHOUT INCIDENT. THIS EVENT IS BEING REPORTED AS A MALFUNCTION MDR BECAUSE IF IT RECURRED, IT COULD LEAD TO A CORNEAL ABRASION AND POSSIBLE SURGICAL INTERVENTION.


SOURCE

ADVERSE EVENT OR PRODUCT PROBLEM DESCRIPTION - REPORT DATE: 09/12/2003 MDR TEXT KEY: 1674969 Patient Sequence Number: 1

SUBSEQUENT TO LASIK SURGERY WITH THE INTRALASE FS LASER, THE PT'S VISUAL RECOVERY HAS BEEN DELAYED. THE SURGERY WAS UNEVENTFUL, HOWEVER, POSTOPERATIVELY, THE SURGEON OBSERVED WHAT HE DESCRIBED AS AN "ORANGE PEEL EFFECT" WITH DELAYED VISUAL RECOVERY. PREOPERATIVELY, THE PT'S BEST CORRECTED VISULA ACULTY (BCVA) WAS 20/20 IN BOTH EYES. AT THE 19-DAY POSTOPERATIVE VISIT, THE PT'S BCVA WAS 20/30 OD AND 20/60 OS. AT THE 2-MONTH POSTOPERATIVE VISIT, THE PT'S BCVA IMPROVED TO 20/25 OD. HOWEVER THE OS EYE WAS 20/50. THERE HAVE BEEN NO SECONDARY SURGICAL INTERVENTIONS PERFORMED AT THIS TIME.


SOURCE

THE INTRALASE FS LASER WAS USED TO CREATE THE CORNEAL FLAPS FOR BILATERAL LASIK SURGERY IN 2003. A 120 MICRON FLAP WAS CREATED WITH THE INTRALASE FS LASER, HOWEVER WHEN THE SURGEON ATTEMPTED TO LIFT THE FLAP (IN THE OS EYE) WITH A SLADE SPATULA, HE CREATED A FALSE CHANNEL WITH THE SPATULA. THE SURGEON THEN INTRODUCED THE SPALULA FROM THE OPPOSITE SIDE AND THE FLAP LIFTED SUCCESSFULLY AND THE EXCIMER TREATMENT WAS PERFORMED. AT THE ONE DAY POSTOP VISIT, THE PATIENT PRESENTED WITH FLAP EDEMA, HAZO, RIDGES, AND BLURRY VISION. THE PATIENT WAS RETERRED TO A CORNEAL SPECIALIST FOR POSTOPERATIVE FOLLOW-UP. AT THE ONE-MONTH POSTOPERATIVE VISIT. THE PATIENT'S BEST CORRECTED VISUAL ACUITY (DCVA) IN THE AFFECTED (OS) EYE WAS 20/200, COMPARED WITH THE PATIENT'S PREOPERATIVE BCVA OF 20/20).


SOURCE

SUBSEQUENT TO LASIK SURGERY WITH USE OF THE INTRALASE FS LASER TO CREATE THE CORNEAL FLAP, A PATIENT PRESENTED WITH DIFFUSE LAMELLAR KERATATIS (DLK) BILATERALLY. AT APPROXIMATELY ONE WEEK POSTOPERATIVELY, THE DLK HAD PROGRESSED TO STAFE IV AND CENTRAL FOLDS WERE OBSERVED. THE PATIENT WAS TREATED WITH TOPICAL STERIODS; HOWEVER THE FLAPS WERE NOT LITTED OR RINSED. AT THE 3 WEEK POSTOPERATIVE VISIT, THE PATIENT'S BEST CORRECTED VISUAL ACUITY HAD DECREASED MORE THAN 2 LINES AND RESULTED IN INDUCED ASTIGMATISM.


SOURCE

ADVERSE EVENT OR PRODUCT PROBLEM DESCRIPTION - REPORT DATE: 07/02/2003 MDR TEXT KEY: 1646970 Patient Sequence Number: 1

THE INTRALASE FS LASER AND INTRALASE PATIENT INTERFACE WERE USED TO CREATE THE CORNEAL FLAPS FOR BILATERIAL LASIK SURGEON. DURING SURGERY ON TEH OS EYE, THE DISSECTION WAS INCOMPLETE AND RESULTED IN A TORN CORNEAL FLAP. THE INCOMPLETE DISSECTION WAS LATER ATTRIBUTED TO A BENT PATIENT INTERFACE CONE. THE LASIK SURGERY WAS THEN PERFORMED SUCCESSFULLY AND THE PATIENT'S BEST CORRECTED VISUAL ACUITY (BCVA) IN THE AFFECTED EYE WAS 20/25 AT THE ONE WEEK POSTOPERATIVE VISIT. THE PATIENT'S PREOPERATIVE BCVA WAS 20/20. ALL THE TIME OF THE COMPLAINT CLOSURE, THE PATIENT'S BCVA IMPROVED TO 20/20 AT THE 3 MONTH POSTOPERATIVE VISIT. 6 MONTHS LATER INTRALASE WAS NOTIFIED THAT THIS PATIENT HAD LASIK ENHANCEMENT PERFORMED ON BOTH EYES, THE ENHANCEMENT PROCEDURE WAS NOT PERFORMED AS A RESULT OF THE COMPLICATION. DURING THE ENHANCEMENT ON THE OS EYE, A 160-MICRON FLAP WAS CREATED WITH THE INTRALASE FS LASER. THE SURGEON OBSERVED GAS BUBBLES FORMING UNDER THE PREVIOUS FLAP, SO HE WAITED 5 HOURS AND THEN CRCATED A SECOND FLAP AT A DEPTN TO 200 MICRONS. THE FLAP WAS LIFTED SUCCESSFULLY AND THE EXCIMER ABLATION WAS PERFORMED. AT THE PATIENT'S MOST RECENT POSTOPERATIVE VISIT, THE BCVA IN OS EYE HAD DECREASED FROM 20/20 PREOPERATIVELY TO 20/50 AND IRREGULAR ASTIGMATISM WAS OBSERVED. THE SURGEON IS CONSIDERING PERFORMING A CUSTOM EXCIMER TREATMENT.

ADDITIONAL MANUFACTURER NARRATIVE

REPORT DATE: 07/02/2003 MDR TEXT KEY: 1646973

THE INTRALASE PATIENT INTERFACE CONE WAS RETURNED TO INTRALASE FOR EVALUATION. THE RESULTS OF THE INVESTIGATION REVEALED THAT THE CONE DID NOT MEET SPECIFICATIONS. ONE OF THE FOUR CONE LEGS WAS SLIGHTLY BENT.


SOURCE

"It was reported to intralase that subsequent to bilateral "bladeless" lasik, the pt developed severe "dlk," which was treated with long-term topical and oral steroids. Posterior subcapsular cataracts formed and intrastromal scarring resulted. Cataract surgery will be performed to prevent permanent impairment. It should be noted that the reporting physician assumed this pt's follow-up care and was not the surgeon who performed the lasix procedure."


SOURCE

Quote:

The intralase fs laser was used to create a corneal flap for lasik surgery in 2007 on patient's left (os) eye. The doctor reported he experienced a difficult flap lift, excessive opaque bubble layer (obl) and centration difficulties as patient had loose epithelium. A bandage contact lens (bcl) was placed due to an irregular corneal surface. The patient's preoperative best corrected visual acuity (bcva) was 20/20-2 os. Patient's postoperative bcva is 20/60 os. Current bcva has been requested from the facility, but information has not been provided as of 9/21/07. If additional information becomes available, a supplemental report will be submitted. The association between the event and the device is unknown.


SOURCE

Quote:

Manufacturer Narrative

An intralase clinical applications specialist (cas) has been in contact with the site obtaining patient follow-up status, as well as trying to identify a potential root cause for dlk. The cas visited the site in 2007 and performed an investigation. In summary, the probable root cause appears to be associated with the site not draining their sterilizer regularly. The cas advised site regarding sterilization practices and the site has since changed their statim 2000 sterilizer to a graham autoclave sterilizer. In addition, surgical instruments are now put in an ultrasonic cleaner, packaged, and then autoclaved. Dlk has resolved since noted changes were implemented.

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. Postoperatively (eight days later) the patient was presented with central diffuse lamellar keratitis (dlk) in both eyes (ou). The right (od) eye with stage 2+ dlk and the left (os) with 4+ dlk and slight corneal melting. A flap lift and rinse was performed on left eye only. The patient was treated with steroids. The patient's preoperative best corrected visual acuity (bcva) was 20/20. Patient's postoperative bcva is 20/30 +0. 25+0. 25x115 os with mild haze and 20/20 od. The patient is responding to treatment and dlk has resolved. The association between the event and the device is unk.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively (the next day) the patient presented with diffuse lamellar keratosis (dlk) and central striae. The following month, the patient was diagnosed with central toxic keratopathy (ctk), slight central corneal melting on the left (os) eye and doctor opted to perform a flap lift and rinse on both (ou) eyes. The patient was prescribed with topical steroids and has responded to treatment. The patient's preoperative best corrected visual acuity (bcva) want 20/20 ou. Patient's postoperative bcva is 20/20 od and 20/25+2 os. Dlk and ctk have resolved. The association between the event and the device is unknown.

Manufacturer Narrative

An intralase clinical applications specialist (cas) provided surgery support in 2007, and has been in contact with the physician obtaining patient follow-up status, as well as trying to identify a potential root cause for dlk. The cas and physician believe that the cause of dlk is due to something in the surgical suite environment. The site has recently changed their air filter, started using a disposable canulas, and changed their cleaning solution for the instruments. After implementing these changes, the hospital has noticed a significant improvement in patient outcomes. An intralase field service engineer (fse) performed preventive maintenance on july 25, 2007 and the laser system met specifications and performed as intended.


SOURCE

Quote:

Manufacturer Narrative

On 07/2007, an intralase field service manager visited the site, provided surgery support and performed preventative maintenance. The laser system was assessed, and met all specifications and performed as intended. There were no issues observed during surgery support.

Event Description

The intralase fs laser was used to create bilateral corneal flaps lasik surgery in 2007. During surgery, the flap on the left eye (os) became decentered. Postoperatively, the pt presented with mild microstriae os and the following month, intervention was performed to lift, irrigate, and smooth the flap. The pt's preoperative best corrected visual acuity (bcva) was 20/20 in both eyes. Postoperatively, the pt's bcva is 20/16 in the left eye and 20/25 in the right eye. The association between the event and the device is unk.


SOURCE

Quote:

Manufacturer Narrative

In 2007, an intralase clinical application specialist (cas) visited the site and performed an investigation in attempt to determine a root cause. Cas inquired into instrument and surgical preparation practices, as well as technique. The cas did not identify any unusual practices, and found the laser system met specifications and performed as intended. One day later, an intralase field service engineer (fse) visited the site, performed minor alignment of the oscillator and found the laser system met specifications and performed as intended. A root cause has not been identified for the reported event.

Event Description

The intralase fs laser was used to create corneal bilateral flaps for lasik surgery in 2007. One week postoperatively, the pt presented with central toxic keratopathy (ctk), and stria at which time the doctor opted to perform stria removal and repositioned the flap. The pt's preoperative best corrected visual acuity (bcva) was 20/20 in the right (od) eye and 20/20 in the left (os) eye. The pt's current postoperative bcva is 20/30 od, 20/30 os and 20/25 in both (ou) eyes. The association between the event and the device is unknown.


SOURCE

Quote:

Manufacturer Narrative

On 05/04/2007, a field service engineer inspected the laser and performed a routine preventative maintenance. The laser system met specifications and performed as intended. Twenty seven days later, an intralase clinical applications specialist (cas) visited the site and modified the laser settings to doctor's preference. The laser met specifications and performed as intended upon departure. A root cause has not been identified for the reported event.

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively, the pt presented with trace diffuse lamellar keratitis (dlk) on the right (od) eye and stage 2+ on the left (os) eye. A flap lift and rinse was performed the following day on the left (os) eye only. Pt was treated with oral and topical steroids. The pt's preoperative best corrected visual acuity (bcva) was 20/20 both (ou) eyes. Postoperative bcva is 20/100 od and 20/15-2 os. The od eye was corrected for near vision and the bcva taken was distance vision (monovision treatment). The pt responded to treatment and dlk has resolved. The association between the event and the device is unknown.


SOURCE

Quote:

Manufacturer Narrative

On 05/04/2007, a field service engineer inspected the laser and performed a routine preventative maintenance. The laser system met specifications and performed as intended. Twenty seven days later, an intralase clinical applications specialist (cas) visited the site and modified the laser settings to doctor's preference. The laser met specifications and performed as intended upon departure. A root cause has not been identified for the reported event.

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively, the pt presented with 2+ diffuse lamellar keratitis (dlk) in both (ou) eyes. A flap lift and rinse was performed four days later, and pt was treated with oral and topical steroids. The pt's preoperative best corrected visual acuity (bcva) in the right (od) eye was 20/20-1 and 20/25 in the left (os) eye. Postoperative bcva is 20/20 od and 20/50 os. The os eye was corrected for near vision and the bcva taken was for distance vision (monovision treatment). The pt responded to treatment and dlk has resolved. The association between the event and the device is unknown.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007, in both (ou) eyes. One day postoperatively (the followig day), the pt presented with diffuse lamellar keratitis (dlk) with central toxic keratopathy (ctk). The pt was treated with topical steroids. The preoperative best corrected visual acuity (bcva) was 20/20 ou. The pt's current postoperative bcva is 20/50 + od and bcva 20/30+os. Add'l info has been requested from the site, but none has been forthcoming. If add'l info is received, a supplemental medwatch shall be filed with fda. The physician does not believe the event is device related.

Manufacturer Narrative

An field svc engineer (fse) performed preventive maintenance on 04/19/07, and the laser sys performed as intended, and met specifications. On 05/08/07, an intralase clinical application specialist (cas) visited the site and performed an investigation in attempt to determine a root cause. Per cas, the surgeon believes the reported issue is related to something in the office and not the laser sys. Surgeon is seeking cas expertise to help identify a root cause. Cas made recommendations regarding potential contributors related to instrument preparation and sterilization practices. The cas did not identify any usual environmental or surgical technique issues.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create a corneal flap for lasik surgery in 2007, in the left (os) eye. One day postoperatively (the next day), the pt presented with diffuse lamellar keratitis (dlk) with central toxic keratopathy (ctk). The pt was treated with topical steroids. The preoperative best corrected visual acuity (bcva) was 20/20. The pt's current postoperative bcva is 20/40. Add'l info has been requested from the site, but none has been forthcoming. If add'l info is received, a supplemental medwatch shall be filed with fda. The physician does not believe the event is device related.

Manufacturer Narrative

On 4/19/07, a field svc engineer (fse) performed preventive maintenance, and the laser maintenance performed as intended, and met specifications. On 5/08/07, an intralase clinical application specialist (cas) visited the site, and performed an investigation in attempt to determine a root cause. Per cas, the surgeon believes the reported issue is related to something in the office and not the laser sys. Surgeon is seeking cas expertise to help identify a root cause. Cas made recommendations regarding potential contributors related to instrument preparation and sterilization practices. The cas did not identify any unusual environmental or surgical technique issues.


SOURCE

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively, the next day, the pt presented with stage 1+ diffuse lamellar keratitis (dlk) in both (ou) eyes. A flap lift and rinse was performed prior to that day. Pt was treated with topical steroids. The pt's preoperative best corrected visual acuity (bcva) was 20/20 ou. Postoperative uncorrected visual acuity (bcva) is 20/25 od and 20/25+2 os. The pt is responding to treatment and dlk has resolved. The association between the event and the device is unk.

Manufacturer Narrative

On 2/06/07, a field service engineer performed a scheduled preventative maintenance. The laser system met specifications and performed as intended. On 3/15/07, an intralase clinical applications specialist (cas) visited the site and noticed the laser settings are being modified on a continuous basis, against cas' advice. The site has had on-going construction adjacent to the surgical suite since 2006. An environmental company evaluated the surgical site 1/25/07 and noted the ventilation system was not working effectively, most likely due to an improperly installed air filter. Even though the site uses powder free gloves, white powder was observed on equipment and noted in the environmental report. On 3/29/07, an intralase director of clinical support found the laser system met specifications and performed as intended. It should be noted the organizations recommends treating stages 1 & 2 dlk with topical steroids and observation. The aao does not recommend performing a flap lift & rinse at these mild stages. Air filters haven't been changed as recommended by environmental company on 01/25/2007.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively, the patient presented with stage 2 diffuse lamellar keratitis (dlk) in both eyes (ou) and was prescribed topical and oral steriods. Two days later, the doctor performed a flap lift and rinse. Four days later, postoperative check up, the left eye (os) had progressed to stage 4 dlk. The following month, postoperative check up, dlk was resolved but central scarring present. The patient's preoperative best corrected visual acuity (bcva) was 20/16 ou. Postoperative bcva as of the same day, in the right (od) was 20/16 and 20/125 os. The patient is responding to treatment and dlk has resolved. The association between the event and the device is unknown.

Manufacturer Narrative

In 2007, an intralase field service engineer (fse) visited the site and performed scheduled preventative maintenance-no adjustments were required. Thirteen days later, an fse returned to site due to dlk report and calibarated z-baseline offset and found the system met specifications and performed as intended upon departure. An intralase clinical applications specialist (cas)has been in contact with the site obtaining patient follow up status and trying to identify a possible root cause. Although a single root cause was no identified, the site made the following changes: introduced use of head coverings for staff, disposable covers for buttons on system which are changed after every procedure, use of different cannulae, speculums, modified energy by 0. 05uj lower and cleaned the humidifier and ventilation system. Since implementation of changes noted above, the site has seen a reduction in dlk cases.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create a corneal flap for lasik surgery in 2007 in the left (os) eye. One day postoperatively, the patient presented with stage 2 diffuse lamellar keratitis (dlk). The patient was prescribed topical and oral steroids. Two days later, the doctor performed a flap lift and rinse. The patient's preoperative best corrected visual acuity (bcva) was 20/12. 5 both (ou) eyes. Postoperative bcva as of the following month was 20/12. 5 ou. The patient is responding to treatment and dlk has resolved. The association between the event and the device is unk.

Manufacturer Narrative

On 3/06/07 an intralase field service engineer (fse) visited the site and performed scheduled preventative maintenance - no adjustments were required. The following month, an fse returned to site due to dlk report and calibrated z-baseline offset and found the system met specifications and performed as intended upon departure. An intralase clinical applications specialist (cas) has been in contact with the site obtaining patient follow up status and trying to identify a possible root cause. Although a single root cause was not identified, the site made the following changes: introduced use of head coverings for staff, disposable covers for buttons on system which are changed after every procedure, use of different cannulae, speculums, modified energy by 0. 05uj lower and cleaned the humidifier and ventilation system. Since implementation of changes noted above, the site has seen a reduction in dlk cases.


SOURCE

Quote:

Event Description

The inralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively (the following day) the pt presented with stage 2 diffuse lamellar keratitis (dlk) in both eyes (ou). A flap lift and rinse was performed ou four days later. Pt was treated with topical steroids. The pt's preoperative best corrected visual acuity (bcva) was 20/20 ou. Postoperative bcva is 20/25 od and 20/20 os. The pt responded to treatment and dlk has resolved. The association between the event and the device is unk.

Manufacturer Narrative

In 2007, a field service engineer inspected the laser. The laser sys met specs and performed as intended. Five days later, an intralase clinical applications specialist (cas) provided surgery support and observed mold inside the sterilizer. Cas recommended replacement with new sterilizer and site followed recommendation. Additionally, cas modified laser settings. It should be noted that the american academy of ophthalmology (aao) recommends treating stages 1 & 2 dkl with topical steroids and observation. The aao does not recommend performing a flap lift & rinse at these mild stages. The physician did not follow the recommended treatment protocol.


SOURCE

Quote:

Event Description

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One day postoperatively, the patient presented with grade 2 diffuse lamellar keratitis (dlk) in both eyes (ou). A flap lift and rinse was performed ou on the same day. Dlk seemed to progress to grade 3-4+ in the right (od) eye and grade 3+ dlk in the left (os) eye so a second lift and rinse was performed ou three days later, and a third lift and rinse was performed ou the following day. Central cornea of od began melting on the same day. Patient was treated with oral and topical steroids and a bandage contact lens was placed after the first lift and rinse. The patient's preoperative best corrected visual acuity (bcva) was 20/20 ou. Postoperative uncorrected visual acuity (ucva) is 20/50 od and 20/20 os. The patient's next follow up visit is scheduled for approx one and a half month later. Additional information will be supplied to fda when received. The association between the event and the device is unknown.

Manufacturer Narrative

On 02/06/07, a field service engineer inspected the laser and performed a scheduled preventative maintenance. The laser system met specifications and performed as intended. The following month, an intralase clinical applications specialist (cas) provided surgery support and observed the site has been modifying their laser settings on a continuous basis, against the advice of the cas. Additionally, the site has had on-going construction adjacent to the surgical suite since 2006 that is stirring up dust and debris in the area. An environmental company evaluated the surgical site and noted that the ventilation system was not working effectively, most likely due to an air filter that was improperly installed. White powder was observed on equipment and noted in the environmental report, even though the site uses powder free gloves.


SOURCE

Quote:

The intralase fs laser was used to create a corneal flap for lasik surgery in 2007 on patient's left (os) eye. The doctor reported he experienced a difficult flap lift, excessive opaque bubble layer (obl) and centration difficulties as patient had loose epithelium. A bandage contact lens (bcl) was placed due to an irregular corneal surface. The patient's preoperative best corrected visual acuity (bcva) was 20/20-2 os. Patient's postoperative bcva is 20/60 os. Current bcva has been requested from the facility, but information has not been provided as of 9/21/07. If additional information becomes available, a supplemental report will be submitted. The association between the event and the device is unknown.


SOURCE

The intralase fs laser was used to create bilateral corneal flaps for lasik surgery in 2007. One week post-op (approximately a week later), patient was noted to have elevated intraocular pressure (iop) in the right (od) eye due to pigmentary glaucoma. The patient's preoperative best corrected visual acuity (bcva) was 20/15 od. Postoperatively, the patient's bcva is 20/40 od. Patient treated with medications to address the increased iop. Updated patient status was requested, but information has not been provided to filutowski eye institute by co-managed office as of approx two months later. However, if additional information becomes available, supplemental report will be submitted to fda. The association between the event and the device is unknown.


SOURCE

Quote:

Femtosecond lasers offer patients no substantial advantage over the improved results obtained with new generation microkeratomes for safety and precision, according to Theo Seiler MD, IROC, Zürich, Switzerland, who described the disadvantages of femtosecond lasers as the advocatus diaboli in this discussion. “Actually the femtosecond laser is medically indicated in a minority of our patients, probably less than five per cent. Seducing patients to get femtosecond LASIK as a standard procedure is at least an overkill, if not unethical, according to some,” he said. Recent studies seem to concur.A 100-patient investigation by Lim in 2006 showed that the femtosecond laser had failed to have significant superiority in clinical outcomes like contrast sensitivity and low contrast visual acuity, while in 2007, Patel revealed in over 100 patients that the method of flap creation did not affect the visual outcome. Although flap thickness regularity is one of the main reasons surgeons choose femtosecond laser, an investigation by Talamo revealed that femtosecond-laser flaps were an average of 119± 12μm while mechanical microkeratome flaps measured 130±19μm on average, which reduces variance only slightly, Dr Seiler said.

Rare rainbow glare side effect still occurs with latest IntraLase laser

SOURCE

CHICAGO — Use of the latest IntraLase femtosecond laser does not diminish the occurrence of a rare side effect called rainbow glare, according to a physician who has studied the phenomenon.

"Rainbow glare is caused from the perfectly regular grading pattern of the IntraLASIK pulses in the interface that sets up the constructive interference that splits white light into its component colors and into a number of different bands," Ronald R. Krueger, MD, explained in an interview with Ocular Surgery News after his presentation at the American Society of Cataract and Refractive Surgery meeting, here.

Twenty of the 278 patients in the study reported experiencing the mild optical side effect, and most of these patients reported seeing six bands of light. All of these patients had IntraLASIK using a 60 KHz IntraLase femtosecond laser (Advanced Medical Optics).

There does not appear to be an association with refraction, age or gender, Dr. Krueger noted.

Dr. Krueger said he hopes the phenomenon will be eradicated with future femtosecond technologies.

"Newer femtosecond lasers with smaller energies and tighter spacing like the Ziemer laser may not show this phenomenon, and that's a point of future investigation, to see if scattering effects might be different with different femtosecond lasers," he said.

Advanced Medical Optics Voluntarily Recalls Complete MoisturePlus Contact Lens Solution

SOURCE

The U.S. Food and Drug Administration is alerting health care professionals and their patients who wear soft contact lenses about a voluntary recall of Complete MoisturePlus Multi Purpose Solution manufactured by Advanced Medical Optics of Santa Ana, Ca.

The company is taking this action as a precaution because of reports of a rare, but serious, eye infection, Acanthamoeba keratitis, caused by a parasite. The link between the solution and the infection was identified as a result of an investigation by the Centers for Disease Control and Prevention (CDC).

Consumers who wear soft contact lenses should stop using the solution, discard all partially-used or unopened bottles and replace their lenses and storage container.

"We believe the company acted responsibly in taking this voluntary action and support their decision to be proactive in the interest of public health," said Daniel Schultz, M.D., director of FDA's Center for Devices and Radiological Health. "FDA and CDC are working closely with the company to collect additional information and we will continue to alert consumers and advise them as more information becomes available."

Acanthamoeba keratitis may lead to vision loss with some patients requiring a corneal transplant. The infection primarily affects otherwise healthy people who wear contact lenses.

Consumers should ask their doctor about choosing an appropriate alternative cleaning/disinfecting product and seek immediate treatment if they have symptoms of eye infection as early diagnosis is important for effective treatment. The symptoms of Acanthamoeba keratitis can be very similar to those of other more common eye infections and may include eye pain or redness, blurred vision, light sensitivity, sensation of something in the eye or excessive tearing but Acanthamoeba is more difficult to treat.

It is estimated that Acanthamoeba keratitis infections occur in approximately 2 out of every 1 million contact lens users in the United States each year. However, in a multi-state investigation to evaluate a recent increase in Acanthamoeba keratitis cases, CDC determined that the risk of developing AK was at least seven times greater for those consumers who used Complete MoisturePlus solution versus those who did not. Additional information regarding the CDC results is available at the CDC website http://www.cdc.gov/mmwr/preview/mmwrhtml/mm56d526a1.htm.

"The ongoing CDC investigation is a collaborative effort," said Michael Beach, M.D., a Division of Parasitic Diseases team leader with CDC. "We are working with FDA, state, territory, university, and clinical partners in an effort to further understand whether usage or contamination of this solution led to these Acanthamoeba infections."

All contact lens users should closely adhere to the following measures to help prevent eye infections:

  • Remove contact lenses before any activity involving contact with water, including showering, using a hot tub, or swimming.
  • Wash hands with soap and water and dry them before handling contact lenses.
  • Clean contact lenses according to manufacturer guidelines and instructions from an eye care professional. 
    • Use fresh cleaning or disinfecting solution each time lenses are cleaned and stored. Never reuse or top off old solution.
    • Never use saline solution and rewetting drops to disinfect lenses. Neither solution is an effective or approved disinfectant. 
  • Schedule regular eye exams with your eye care professional
  • Wear and replace contact lenses according to the schedule prescribed by your eye care professional.
  • Store lenses in a proper storage case. 
    • Storage cases should be irrigated with sterile contact lens solution (never use tap water) and left open to dry after each use. 
    • Replace storage cases at least once every three months.

FDA and CDC want to gather information related to Acanthamoeba keratitis in contact lens users. Report adverse events related to these products to MedWatch, the FDA's voluntary reporting program: www.fda.gov/medwatch/report.htm; Phone: (800) 332-1088; Fax: (800) 332-0178; Mail: MedWatch, Food and Drug Administration, 5600 Fishers Lane, Rockville, MD, 20852-9787.

Consumers who believe they are in possession of the recalled product may call the company at 1-888-899-9183.

Additional information about Acanthamoeba infection is available from the CDC website at http://www.cdc.gov/ncidod/dpd/parasites/acanthamoeba/index.htm.

Medical Device Recalls  Class 2 Recall  COMPLETE MoisturePLUS & COMPLETE Amino Moist

SOURCE

Date Recall Initiated: September 15, 2006

Date Posted: March 01, 2007

Recall Number: Z-0344-2007

Product: COMPLETE MoisturePLUS Multi-Purpose Solution (US and Asia Pacific markets, excluding Japan) & COMPLETE Amino Moist Multi-Purpose Solution (Japan only)

Code Information: US Product Number 93184, Lot Numbers: ZB03087, ZB03724, ZB03734, ZB03735, ZB03736 & ZB03739 US Product Number 90104US, Lot Numbers: ZB02710, ZB02714, ZB02718 & ZB02722 US Product Number 90105US, Lot Numbers: ZB02746, ZB02750, ZB02771, ZB02792, ZB02796, ZB02800, ZB02704 & ZB03535

Recalling Firm/Manufacturer: Advanced Medical Optics, Inc. 1700 E Saint Andrew Pl Santa Ana , California 92705-4933  For Addition Information Contact Sandra F. Selvaggi 714-247-8656

Reason For Recall: Due to a potential sterility issue with the product container. Three lots sold in Japan were found to have bacterial contamination, which compromised sterility. Because of this production-line issue at the firm's plant in China, AMO is recalling lots that were manufactured on the same production lines during the same production period.

Action: Beginning on September 15, 2006, a product notification letter was sent via facsimile or communicated via telephone with each of the customer accounts. Beginning on September 19, 2006, an AMO Japan sales representative visited each of the customer accounts obtaining COMPLETE Amino Moist Multi-Purpose Solution subject to recall. Letters dated November 21, 2006 were sent from AMO, Santa Ana, California beginning Novemer 27, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 182,678 units for all US products, 2,943,207 units worldwide

Distribution: Worldwide including USA, Australia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan and Thailand.

Medical Device Recalls  Class 2 Recall  Krystal Klear Rinse

SOURCE

Date Recall Initiated: September 15, 2006

Date Posted: March 01, 2007

Recall Number: Z-0345-2007

Product: Krystal Klear Rinse (China only)

Code Information: No US distribution

Recalling Firm/Manufacturer: Advanced Medical Optics, Inc. 1700 E Saint Andrew Pl Santa Ana , California 92705-4933  For Addition Information Contact Sandra F. Selvaggi 714-247-8656

Reason For Recall: Due to a potential sterility issue with the product container. Three lots sold in Japan were found to have bacterial contamination, which compromised sterility. Because of this production-line issue at the firm's plant in China, AMO is recalling lots that were manufactured on the same production lines during the same production period.

Action: Beginning on September 15, 2006, a product notification letter was sent via facsimile or communicated via telephone with each of the customer accounts. Beginning on September 19, 2006, an AMO Japan sales representative visited each of the customer accounts obtaining COMPLETE Amino Moist Multi-Purpose Solution subject to recall. Letters dated November 21, 2006 were sent from AMO, Santa Ana, California beginning Novemer 27, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 182,678 units for all US products, 2,943,207 units worldwide

Distribution Worldwide including USA, Australia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan and Thailand.

Medical Device Recalls  Class 2 Recall  COMPLETE Multi-Purpose, 10 Minute, Comfort 8 in 1, Comfort Plus, and Protec

SOURCE

Date Recall Initiated: September 15, 2006

Date Posted: March 01, 2007

Recall Number: Z-0346-2007

Product: COMPLETE Multi-Purpose Solution (Asia Pacific markets, excluding Japan, Korea and Thailand), COMPLETE 10 Minute (Japan only), Comfort 8 in 1 Solution (Indonesia only), COMPLETE Comfort Plus All in One Solution (Korea only) & COMPLETE Protec Formula Multi-Purpose Solution (Thailand only)

Code Information: No US distribution

Recalling Firm/Manufacturer: Advanced Medical Optics, Inc 1700 E Saint Andrew Pl Santa Ana , California 92705-4933  For Addition Information Contact Sandra F. Selvaggi 714-247-8656

Reason For Recall: Due to a potential sterility issue with the product container. Three lots sold in Japan were found to have bacterial contamination, which compromised sterility. Because of this production-line issue at the firm''s plant in China, AMO is recalling lots that were manufactured on the same production lines during the same production period.

Action: Beginning on September 15, 2006, a product notification letter was sent via facsimile or communicated via telephone with each of the customer accounts. Beginning on September 19, 2006, an AMO Japan sales representative visited each of the customer accounts obtaining COMPLETE Amino Moist Multi-Purpose Solution subject to recall. Letters dated November 21, 2006 were sent from AMO, Santa Ana, California beginning Novemer 27, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 182,678 units for all US products, 2,943,207 units worldwide

Distribution Worldwide including USA, Australia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan and Thailand.

Medical Device Recalls  Class 2 Recall  Complete Blink N Clean

SOURCE

Date Recall Initiated: September 15, 2006

Date Posted: March 01, 2007

Recall Number: Z-0347-2007

Product: Complete Blink N Clean (US and Asia Pacific markets)

Code Information: Lot numbers: ZB02845, ZB03506 & ZB03510 for US

Recalling Firm/Manufacturer: Advanced Medical Optics, Inc. 1700 E Saint Andrew Pl Santa Ana , California 92705-4933  For Addition Information Contact Sandra F. Selvaggi 714-247-8656

Reason For Recall: Due to a potential sterility issue with the product container. Three lots sold in Japan were found to have bacterial contamination, which compromised sterility. Because of this production-line issue at the firm''s plant in China, AMO is recalling lots that were manufactured on the same production lines during the same production period.

Action: Beginning on September 15, 2006, a product notification letter was sent via facsimile or communicated via telephone with each of the customer accounts. Beginning on September 19, 2006, an AMO Japan sales representative visited each of the customer accounts obtaining COMPLETE Amino Moist Multi-Purpose Solution subject to recall. Letters dated November 21, 2006 were sent from AMO, Santa Ana, California beginning Novemer 27, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 182,678 units for all US products, 2,943,207 units worldwide

Distribution Worldwide including USA, Australia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan and Thailand.

Medical Device Recalls  Class 2 Recall  Lens Plus Ocupure

SOURCE

Date Recall Initiated: September 15, 2006

Date Posted: March 01, 2007

Recall Number: Z-0348-2007

Product: Lens Plus Ocupure Saline Sterile Rinsing Solution (Asia Pacific markets, excluding Japan) & Consept Rinsing Solution (Japan only)

Code Information: No US distribution

Recalling Firm/Manufacturer: Advanced Medical Optics, Inc. 1700 E Saint Andrew Pl Santa Ana , California 92705-4933  For Addition Information Contact Sandra F. Selvaggi 714-247-8656

Reason For Recall: Due to a potential sterility issue with the product container. Three lots sold in Japan were found to have bacterial contamination, which compromised sterility. Because of this production-line issue at the firm''s plant in China, AMO is recalling lots that were manufactured on the same production lines during the same production period.

Action: Beginning on September 15, 2006, a product notification letter was sent via facsimile or communicated via telephone with each of the customer accounts. Beginning on September 19, 2006, an AMO Japan sales representative visited each of the customer accounts obtaining COMPLETE Amino Moist Multi-Purpose Solution subject to recall. Letters dated November 21, 2006 were sent from AMO, Santa Ana, California beginning Novemer 27, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 182,678 units for all US products, 2,943,207 units worldwide

Distribution Worldwide including USA, Australia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, New Zealand, Philippines, Singapore, Sri Lanka, Taiwan and Thailand.

Spherical aberrations persist after LASIK with laser or microkeratome created flaps

SOURCE

OSN SuperSite Top Story 5/10/2007

FORT LAUDERDALE, Fla. — Spherical aberration increases and remains elevated for at least 1 year after LASIK regardless of whether flaps are created using a femtosecond laser or a mechanical microkeratome, according to a study presented here.

However, the study data show that the femtosecond laser induced lasting spherical aberration similar to that resulting from microkeratomes, he said.

Femtosecond laser should not be standard of care, surgeon says

SOURCE

OSN SuperSite Top Story 5/22/2007

"Seducing patients to get femtosecond LASIK as the standard is overkill," Theo Seiler, MD, PhD, said in a counterargument after Thomas Neuhann, MD, offered a stance in favor of femtosecond lasers.

According to Dr. Seiler, recent papers published in peer-reviewed journals have concluded that flap creation does not affect visual outcomes. He also said that the frequency of transient light sensitivity, although improved, is still a drawback.

A Comparative Confocal Microscopy Analysis After LASIK With the IntraLase Femtosecond Laser vs Hansatome Microkeratome

Journal of Refractive Surgery Vol. 23 No. 3 March 2007

Manuel Ramírez, MD; Everardo Hernández-Quintela, MD, MSc; Ramón Naranjo-Tackman, MD

In our study, we observed the same absence of a subepithelial nerve plexus at 1 week and 1 month postoperatively in the eyes operated with the femtosecond laser system. The detection of bright, reflective particles at the interface by confocal microscopy after LASIK has been consistently described in human corneas in previous studies. 6,7 Several theories explain the presence of these reflective particles at the interface. Kaufman et al8 attributed the refl ective particles to surface debris on the microkeratome blades, probably caused by sterile wax or oil-like material, whereas Hirst and Vandeleur9 attributed them to exposure of the methylcellulose sponges to the excimer laser beam during the stromal ablation. This issue has yet to be resolved. Dawson et al10 studied these interface refl ective particles after LASIK and made a pathologic correlation, suggesting that the corneal interface wound over the center of the cornea consists of a hypocellular primitive stromal scar, which contains cellular structures that appear on confocal microscopy as interface refl ective particles, such as intracytoplasmic vacuoles at the activated keratocytes, implanted and degenerated epithelial cells, and fragmented fibrillar collagen. In the present study, no significant difference was found in the number of interface refl ective particles in tissue treated with the femtosecond laser and that treated with the mechanical microkeratome at 1 week and 1 month postoperatively. This finding is consistent with that of Dawson et al,10 and the same types of refl ective particles were found using both systems. Behind the interface at the ablation zone, the keratocytes appeared as hyper-reflective objects with visible cytoplasm processes, which are the same characteristics that have been described as activated keratocytes in previous reports.6,7 We found no signifi cant difference in the morphological findings by confocal microscopy at the fl ap interface after LASIK in eyes treated with the femtosecond laser and a mechanical microkeratome.

Central Flap Necrosis After LASIK With Microkeratome and Femtosecond Laser Created Flaps

Journal of Refractive Surgery Vol. 23 No. 3 March 2007

Bryan C. Hainline, MD; Marianne O. Price, PhD; David M. Choi, MD; Francis W. Price Jr, MD

#1

A 45-year-old man underwent uncomplicated LASIK with the VISX Star S4 and IntraLase lasers for 5.75 D sphere in the right eye. Preoperative BSCVA was 20/15...

...On postoperative day 4, the patient had no complaints and examination of the flap showed central infl ammation of the entire flap thickness with moderate sands in the bed, no epithelial defect, and a cracked-glass pattern in the central fl ap (Fig 1). A flap lift was performed and some minimal inflammatory debris was observed in the interface with a jelly-like consistency in the central portion of the flap. By postoperative day 6, necrosis of flap tissue had occurred, causing wrinkling and depression of the central fl ap (Fig 2). The patient continued on prednisolone acetate 1% four times daily for 2 weeks with a subsequent 3-week taper. Seven weeks after surgery, UCVA in the right eye was 20/301 and manifest refraction did not improve. The flap at this time showed central haze and scarring.

#2

A 47-year-old woman underwent uncomplicated LASIK with a VISX Star 4 and IntraLase lasers for refraction of 3.00 0.50  75 in the right eye and 3.00 1.00  170 in the left eye. Preoperative BSCVA was 20/20 in each eye. On postoperative day 1, the patient complained of foreign body sensation in both eyes but no pain...

...Slit-lamp examination showed mild interface inflammation and oil in the interface superiorly in the right eye and central flap haze with mild to moderate inflammation in the peripheral interface in the left eye. A flap lift was performed in the left eye and minimal inflammatory debris was observed on the anterior stroma with a jelly-like consistency in the central portion of the flap. On postoperative day 14, the flap was clear in the right eye and the fl ap in the left eye showed mild central haze with folds and central depression but no interface inflammation.

A Lighter Defter Touch

SOURCE

By Michelle Andrews

Excerpt:

Andrew Jankovich had the Cadillac of LASIK eye procedures. His Cincinnati surgeon used the IntraLase laser  to cut the flap and wavefront technology to guide the laser that reshaped his corneas. Following the surgery, his vision was 20/15, and his doctor said everything looked fine. But almost immediately, he noticed that his left eye was scratchy and irritated. Instead of going away, the problem worsened, and he now has severe dry eye. It's been a year now, and he says he constantly feels as if there's a hair in his eye or a raw spot there. Special eyedrops make it slightly better, but it never goes away. If he could make the choice again, Jankovich says, "I'd wear 3-inch-thick glasses instead."

For many people, ditching their glasses is a big part of the appeal of laser eye surgery. But before you pony up thousands of dollars, make sure you understand the potential risks and limitations. Only then can you make a clear-eyed choice.

SOURCE

IntraLase: Changing the LASIK Landscape

Though the exact cause of TLS is still uncertain, some surgeons believe that the inflammation is caused by necrotic cellular debris…

Transient light sensitivity a minor complication of IntraLase use

Some users of the IntraLase femtosecond laser keratome first noticed the complication when they began working with the system more than 2 years ago. Since then, the phenomenon has gone under multiple names.

Flap folds after femtosecond LASIK

To report a case of bilateral flap folds after a laser-assisted in situ keratomileusis (LASIK) procedure in which the flap was created by the femtosecond laser.

Macular hemorrhage after laser in situ keratomileusis (LASIK) with femtosecond laser flap creation

To report the first case of macular hemorrhage following LASIK with femtosecond laser flap creation.

Refractive surgery: lessons to be learned

"Indeed the long-term problems created by laser refractive surgery are not yet a major issue, but soon will be."

Complications of refractive excimer laser surgery

A German article related to complications.

Read more...

VISX - Possible Deception?

VISX reported that 97.7% (84/86) of eyes had UCVA of 20/20 or better at 12 months. These 86 eyes represent only 24.5% of patients. Accountability is reported to be 95.6%, despite the fact that 70.7% (248/351) of patients were labeled “not yet eligible” for analysis at 12 months.

 

Alcon - Summit/Autonomous

Alcon LADARVISION 4000 Safe? Don't Think So...

 

Filed August 20, 2008

Reed v Alcon

Manufacturers beware, you are deserving of many CLASS-ACTION LAWSUITS!

The recalls listed below are too little, too late:

  Alcon Warns Surgeons of Central Islands

Alcon RefractiveHorizons, Inc. (Fort Worth, TX) has issued a safety alert for the Ladar6000 excimer laser (Alcon Laboratories, Inc., Fort Worth, TX). According to spokeswoman Kathleen Golden, the company directed surgeons to discontinue using the laser for myopic CustomCornea procedures (Alcon Laboratories, Inc.) after seven surgical centers reported an increased presence of topographically observed central islands in treated patients. No safety alerts were issued for other procedures performed with the laser, Ms. Golden said in an interview with Cataract & Refractive Surgery Today. The Ladar6000 first received FDA approval in May 2006.

Alcon has alerted the FDA to the safety concern and also has submitted a Premarket Approval supplement that proposes the issue could be resolved by reversing the direction of the laser's ablation pattern and resetting its repetition rate to 60 Hz.

Approximately 100 units have been affected by this alert, including 12 outside the US in Spain, Portugal, Italy, and other countries, Ms. Golden said.

"We are currently asking physicians to provide any information they have that might help further our investigation," she said. "We will continue to work diligently with the FDA to resolve the issue."

http://www.fda.gov/cdrh/recalls/recall-022107.html

Class 1 Recall: Alcon Refractive Horizons, Inc. LADAR6000™ Excimer Laser System

Date Recall
Initiated February 21, 2007

Product: LADAR6000™ Excimer Laser System for CustomCornea® algorithm for myopia with astigmatism (M3), and myopia without astigmatism (A7)

Use: The LADAR6000™ Excimer Laser System is used for LASIK and wavefront-guided LASIK treatment for the reduction or elimination of mild to moderate nearsightedness (myopia) and farsightedness (hyperopia) with or without astigmatism and for mixed astigmatism in patients who are 21 years of age or older with documented stability of refraction for the prior 12 months. The cornea is the clear (transparent) dome-shaped front portion of the outer covering of the eye.

Recalling Firm: Alcon Refractive Horizons, Inc.
2800 Discovery Dr.
Orlando, Florida 32826-3010

Reason for Recall: The use of Alcon Refractive Horizon, Inc.’s CustomCornea® algorithm for myopia with astigmatism (M3) and myopia without astigmatism (A7) with the LADAR6000™ Excimer Laser caused corneal abnormalities (“central islands”). It also resulted in decreased visual sharpness (visual acuity). These “central islands” may not be correctable with lasers. Additionally, the decrease in visual acuity may not be correctable with glasses or contact lenses.

This recall is limited to the CustomCornea® algorithms described above, and not the entire LADAR6000™ device.

Public Contact: Patients with questions can call the company at 1-877-523-2784.

FDA District: Florida

FDA Comment: From August 17, 2005, through February 21, 2007, Alcon Refractive Horizon, Inc. distributed 102 units worldwide with approximately 89 of those units distributed in the U.S. Eighteen are held in Alcon’s possession and two are being held by the freight handler.

Alcon first notified doctors on February 21, 2007 of the problem via letter and recall notice, directing doctors to stop using the CustomCornea® algorithm for myopia with astigmatism (M3) and myopia without astigmatism (A7).

On May 11, 2007, Alcon updated doctors in a letter stating that Alcon will deactivate their device’s ability to perform CustomCornea® Myopia and CustomCornea® Myopia with astigmatism procedures. Alcon has completed deactivation of these two algorithms in all LADAR6000™ lasers in service in the U.S.

Class I recalls are the most serious type of recall and involve situations in which there is a reasonable probability that, should this particular malfunction occur, use of the affected product may cause serious injury or death if the problem is not corrected.
Health care professionals and consumers may report adverse reactions or quality problems experienced with the use of this product to the FDA's MedWatch Adverse Event Reporting program either online, by regular mail or by FAX.

Online: www.fda.gov/MedWatch/report.htm

Regular Mail: use postage-paid FDA form 3500 available at: www.fda.gov/MedWatch/getforms.htm
Mail to MedWatch 5600 Fishers Lane, Rockville, MD 20852-9787

FAX: 1-800-FDA-0178

www.osnsupersite.com/view.asp?rID=22422

Alcon has officially completed the deactivation of two algorithms used for CustomCornea treatment of myopia with or without astigmatism, the U.S. Food and Drug Administration announced.

The algorithms were recalled in February in response to reports of corneal abnormalities or "central islands" that may not be correctable with laser therapy. Use of the algorithms has also been linked with a decrease in visual acuity that may not be correctable with glasses or contact lenses, the FDA said.

Health care professionals were notified of the problem in a Feb. 21 letter and recall notice and were directed to no longer use the LADAR6000 units to perform CustomCornea LASIK for myopia. On May 11, they were advised by the FDA that Alcon would be willing to deactivate the device's ability to perform these procedures.

FDA Warning Letter to Alcon

http://www.fda.gov/foi/warning_letters/g5316d.htm

555 Winderley Pl., Ste. 200

Maitland, FL 32751

CERTIFIED MAIL

RETURN RECEIPT REQUESTED

WARNING LETTER

FLA-05-27

April 15, 2005

Mr. Gary A . Woodrell

Vice President

Refractive Manufacturing Operations

Alcon Laboratories, Inc.

2501 Discovery Drive

Orlando, Florida 32826

Dear Mr. Woodrell :

During an inspection of your establishment located in Orlando, Florida on January 10 - 18, 2005, our Investigator determined that your firm manufactures the LADARVision 4000 Excimer Laser System. An excimer laser is a device as defined by Section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), [21 U.S.C. 321(h)].

The above-stated inspection revealed that this device is adulterated under section 501(h) of the Act, in that the methods used in, or the facilities or controls used for, the manufacture, packing, storage, or installation are not in conformance with the Current Good Manufacturing Practice (CGMP) requirements for medical devices which are set forth in the Quality System regulation, as specified in Title 21, Code of Federal Regulations (CFR), Part 820. Significant deviations include, but are not limited to, the following:

1. Failure to review and evaluate all complaints to determine whether an investigation is necessary. When no investigation is made, the manufacturer shall maintain a record that includes the reason no investigation was made and the name of the individual responsible for the decision not to investigate as required by 21 CFR 820.198(b). (FDA 483, Item #1).

Data downloaded from LADARVision systems currently in use in the U.S. showed significant differences in the retreatment requirements between patients treated prior to 15 minutes after calibration of the device as opposed to patients who were treated after 15 minutes following calibration of the device. Another table was provided that used the points of < 30 minutes from calibration to treatment and > 30 minutes or more from calibration to treatment.

 

A patient whose surgical procedure is initiated after 30 minutes has a 30% greater risk of retreatment than does the patient whose treatment commences prior to 30 minutes after calibration. Beam drift occurs if too much time passes between calibration and treatment, with possible translation or rotation of the beam.

 

Your response to this data has been inadequate. There is a note to a warning to the device user manual, which states, "WARNING: System calibration must be done between patients and within 15 minutes of surgery, failure to perform calibration in the time frame indicated may result in improper orientation of the ablation. " However, there was no reason provided to explain the use of these times. Moreover, the note to warning is not by itself sufficient to address the seriousness of this problem . (FDA 483, Item #1)

 

2. Failure to review, evaluate, and investigate any complaint involving the possible failure of a device, labeling, or packaging to meet any of its specifications, unless such investigation has already been performed for a similar complaint and another investigation is necessary as required by 21 CFR 820.198(c). Complaints received from January 1, 2002, through January 10, 2005, revealed the most common complaint codes as follows:

 

Class code - 801: Laser not firing,

 

Class code T 833: Translator malfunction,

 

Class code - 802A: Loss of tracking, and

 

Class code - 802B: Not able to track

 

Complaint records associated with these complaint class codes are not adequately reviewed, evaluated, and investigated to determine the root-cause of the system and/or sub-assembly component malfunction (FDA 483, Item #2).

 

Specific complaints reviewed during the inspection revealed the following:

 

a . Complaint Record RS030392 received on April 14, 2003, involving the LADARVision® 4000 Beta, lot number L4B1023S references the laser stopped firing during surgery at 92% complete. The Field Service Engineer (FSE) found arcing in the laser chassis assembly. The FSE adjusted components to prevent future arcing. The complaint record does not document and confirm that an investigation was conducted to determine the root cause of the reported problem. The record also fails to document the justification for not conducting an investigation and is not signed and dated by responsible personnel.

 

b. Complaint Record RS041106 received on August 23, 2004, involving LADARVision® 4000 Beta, lot number L4B1023S references the laser not firing. An FSE replaced the laser control electronics that failed. The replaced component was evaluated and verified the failure was caused by a broken connector. The record does not document and confirm that an investigation was conducted to determine the root cause of the broken connector. The record also fails to document the justification for not conducting an investigation and is not signed and dated by responsible personnel.

 

c. Complaint Record RS041047 received on August 11, 2004, involving a refurbished LADARVision® 4000 Beta, lot number L4B1090S referencing noise from the laser with a system failed error message. A similar complaint, RS030392 referenced a malfunctioning translator, which was replaced because of faulty/defective bearings. The complaint was classified as complaint class 823- Noise Coming from system. The complaint was more appropriately determined a translator malfunction, which is complaint class 833. The malfunction causes the laser to stop operating or firing resulting in surgery being terminated, causing under correction, which is not considered by your firm to be an injury.

 

d. Complaint Record RS030539 received on May 16, 2003, involving LADARVision® 4000 Beta, lot number L4B1022S referencing loss of tracking during surgery. Surgery was stopped at 57% complete. The FSE balanced the infrared pulse and changed the DSP gains. The record does not document an investigation that was conducted to determine the root-cause of the report to conduct an investigation into the reported malfunction.

 

e. Complaint Record RS031262 received on November 14, 2003, involving LADARVision® 4000 Beta, lot number L4B1022S references a laser unable to track. The FSE confirmed the failure mode and replaced the zoom motor. The Manufacturing Engineer (ME) confirmed that the motor performed erratically when operating under a torque and will not reverse direction when prompted by software. A similar complaint FS030539 (noted above) does not document that an investigation was conducted to determine the root cause for the zoom motor failure or the justification for not conducting an investigation into the malfunction.

 

3. Failure to promptly review, evaluate, and investigate any complaint that represents an event which must be reported to FDA under 21 CFR part 803 by a designated individual(s) and shall be maintained in a separate portion of the complaint files otherwise clearly identified as required by 21 CFR 820.198(d) and 803..50(b)(2).. (FDA 483, Item #3). Complaint .Record RS041447 received on November 5, 2004, (MDR 1061857-2004-00011) involving the LADARVision® 4000, lot number L4N1636S referenced the report of a poor clinical outcome. The primary custom-cornea, lasik procedure conducted on June 4, 2004, resulted in a two line loss of Best Corrected Visual Acuity (BCVA), 20/20 at pre-op and 20/30 at the four month post-op visit. A retreatment was conducted on October 29, 2004, resulting in an additional one line loss of BCVA, which was 20/30 at four months after post-op and 20/40 at one week after the retreatment post-op visit. No review, evaluation, and investigation were conducted of the primary custom-cornea lasik procedure on June 4, 2004. The retreatment procedure was reviewed, evaluated, and investigated, which is not covered under the system's labeling including the collection of data such as Operative Summary, LadarWave printouts, and Operative Reports. The complaint was closed December 13, 2004. No review, evaluation or investigation was conducted of the primary custom-cornea, lasik procedure which occurred on June 4, 2004.

 

4. Failure to establish and maintain procedures that define the responsibility for review and the authority for the disposition of nonconforming product as required by 21 CFR 820.90(b)(1). (FDA 483, Item #4). Your own procedures, specifically, SOP 7501-00.38, Field Returns, and SOP 7003-0909, Evaluation of Non-Conforming Parts Returned from Field Service, are not followed:

 

a. Complaint Record RS040448 - Per the referenced SOPs all parts replaced in the field are to be returned for evaluation. An evaluation of malfunctioning translators was not conducted as required and the service activity was considered routine maintenance instead of being assessed as a complaint.

 

b. Complaint Record RS040031 - Per the referenced SOPs gas filters were not returned for evaluation and an evaluation was not performed. This report was evaluated by Product Safety (PS) and classified as a "Malfunction". Personnel experienced headache, dry tight throat, and nausea resulting in an emergency room (ER) visit.

 

c. Complaint Record RS031155 - A FSE found a lead washer was unevenly crimped, which he replaced. The part was not returned and an evaluation was not performed. A MDR was evaluated by your PS team and classified as "Other" without explanation. Personnel experienced vomiting and nausea resulting in an ER visit.

 

The above-stated inspection also revealed that your device is misbranded under section 502(t)(2) of the Act, in that your firm failed or refused to furnish any material or information required by or under section 519 respecting the device. Specifically, your firm failed to report within 30 days whenever the manufacturer receives or otherwise becomes aware of information, from any sources, that reasonably suggests that a device marketed by the manufacturer has caused or contributed to a death or serious injury, as required by 21 CFR 803.50(a)(1).

 

The following complaints referencing serious injuries where not submitted within 30 days to FDA as required:

 a. Complaint Record RS041329 b. Complaint Record RS030632

Your firm also failed to investigate adverse event reports and to evaluate the cause of the reported event as required by 21 CFR 803.50(b)(2). The following adverse event reports have not been adequately investigated as required:

 a. Complaint Record RS030392 b. Complaint Record RS041106 c. Complaint Record RS041047 d. Complaint Record RS031262 e. Complaint Record RS030355 f.. Complaint Record RS031146 g. Complaint Record RS030632 h. Complaint Record RS031257

This letter is not intended to be an all-inclusive list of violations at your facility. It is your responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, Form FDA 483 (FDA 483), issued at the closeout of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality assurance systems. You should investigate and determine the causes of the violations, and take prompt actions to correct the violations and to bring your products into compliance.

 

We have reviewed your response, dated February 3, 2005. We acknowledge that you have proposed to improve your complaint handling procedure. We would appreciate receiving the periodic reports that you have promised. Nevertheless, your response to the violations discussed above is inadequate because our review of the data shows that reviews, evaluations, and corrective actions were not fully assessed. Also your own procedures were not followed and misinterpretations were made as to the status of complaints that were reported and the conclusions that were drawn, which affected the corrective actions that were required. You should address each and every observation when responding to this letter. Your response has been made part of the Florida District file.

 

Additionally, no premarket submissions for Class III devices to which QS regulation deficiencies are reasonably related will be cleared until the violations have been corrected. Also, no requests for Certificates to Foreign Governments will be approved until the violations related to the subject devices have been corrected. You should take prompt action to correct these deviations. Failure to promptly correct these deviations may result in regulatory action being initiated by the Food and Drug Administration without further notice. These actions include, but are not limited to, seizure, injunction, and/or civil penalties.

 

Please notify this office in writing within fifteen (15) working days of receipt of this letter, of any steps that you are still in the process of taking to correct the noted violations, including (1) the time frames within which the corrections will be completed, (2) any documentation indicating the corrections have been achieved, and (3) an explanation of each step being taken to identify and make corrections to any underlying systems problems necessary to assure that similar violations will not recur.

Your response should be sent to Timothy J. Couzins, Compliance Officer, Food and Drug Administration, 555 Winderley Place, Suite 200, Maitland, Florida 32751, (407) 475-4728.

Sincerely,

/S/

Emma R . Singleton

Director, Florida District

Living With LASIK

(Below is a transcript of "Living with Lasik--Part Three", which aired on September 27, 2005.)

http://www.foxchicago.com/_ezpost/data/26861.shtml

Anchor One: If you're considering having laser eye surgery -- or if you're one of the thousands of people who've had the procedure and aren't satisfied with the results --- tonight's FOX Focus may be of particular concern to you.

Anchor Two: Last December, we detailed a series of disturbing complaints being made about one of the most prominent lasers currently in use in the U.S. The Food and Drug Administration has now cited the company that makes it with numerous violations, prompting critics to call this machine unsafe. It's a laser you can find in surgical centers throughout the Chicago-area, and tonight our Mark Saxenmeyer is here with an exclusive follow-up. Mark?

Mark on set: Millions of people worldwide are "Living with Lasik" and the majority are quite happy with the results. Yet surgical industry analysts estimate as many as 250,000 Americans now claim to be suffering from some kind of visual complication as a result of it. Determining what exactly went wrong is sometimes difficult--and often impossible to prove. But tonight we focus in on one potential cause--a laser and a company that are now the target of multiple lawsuits and an on-going FDA investigation.

(taped presentation begins)

Voice of laser eye surgeon to a patient: Lie down, head up to the head of the bed

It's a surgery which enables many to throw away their glasses and contacts for good.

Surgeon to patient: The sound you hear is the sound of the laser

A flap is cut open across the eye and a carefully-programmed laser begins vaporizing tissue to correct vision complications.

Surgeon to patient: Just keep looking right there! Beautiful!

It's a two and a half billion dollar a year industry.

Surgeon to patient: Allright you did great!

But sometimes there are horror stories.

Terri Warner: You could hear it powering up. And the red light came on there were like two to four snaps and then there was a hiss, like a small hiss and then there was total silence. There was silence in the whole room.

In July 2004, Terri warner of Savannah, Georgia had laser eye surgery, on a machine like this, the Ladarvision 4000.

Terri Warner: I was told it was of the highest degree of professional machinery that you could get.

But just moments after the laser began firing into her right eye, she says her eye surgeon and an assistant began speaking in hushed, worried tones.

Terri Warner: She asked him to re-boot and he said I've already done that. There were more whispers and she said we're just going to put the flap down and try to figure out what went wrong.

Several days later Terri was asked to return to re-do the surgery on her right eye, and this time, laser her left as well. A follow-up evaluation revealed excellent vision results with the left, but serious problems with the right.

Terri talking with her daughter: I really can't see.

There were inexplicable blisters on her cornea, she says, and despite several additional surgeries to try to fix her right eye....

Terri Warner: As it is now i can't drive my car, I can't, I'm kinda housebound.

There are only half a dozen laser vision correction systems currently in use in the United States. The one used on Terri, the Ladarvision, is made and marketed by Alcon--a Texas-based international pharmaceutical company, and the second largest provider of laser systems in the U.S..

Randy Moore: We believe that the laser did not operate as it was programmed to.

Attorney Randy Moore is suing Alcon on behalf of a different patient, a Dallas woman who claims a Ladarvision laser malfunctioned during her April 2001 surgery.

Randy Moore: We think the laser did not have enough voltage, did not have enough strength to take away the right amount of tissue.

In court documents Alcon denies its laser was defective. Yet Moore says his client, an ophthalmologist herself, is suffering from some of the most common lasik-related side effects:

Randy Moore: Visual distortions, ghosting, halos and starbursts. She describes it as looking through a dirty window.

In fact, many Lasik patients who describe similar problems say they can find nothing--be it glasses or contacts or medications-- to reverse the damage.

Randy Moore: You're permanently impaired for the rest of your life.

Alcon is facing other suits as well. This Maryland eye surgeon claims the Ladarvision laser she used in her practice began to experience "erratic machine performance, discrepancies (and) malfunctions" which resulted in patients suffering "severe visual problems". Alcon has filed a motion to dismiss this case.

The Washington State man who filed this suit, claiming that his vision has also been destroyed, settled out of court with Alcon for 90 thousand dollars just days ago. He alleged that Alcon failed to "advise medical professionals of potential problems with the Ladarvision system. Under the terms of the settlement, however, Alcon neither admits nor denies any liability.

According to its web site, Alcon's lasers are currently being used by dozens of eye surgeons throughout northern Illinois and northwest Indiana. Yet when fox news chicago contacted nearly 20 centers to find out just how satisfied they are with their lasers, and with Alcon, every single one of them declined to be interviewed for this report.

Randy Moore: If they've operated on patients and they've gotten bad results, publicizing the bad result may result in litigation for the physician.

Legal action aside, the Food and Drug Administration is now turning up the heat on Alcon as well, issuing this warning letter which cities Alcon with "failure to review and evaluate all complaints" involving its Ladarvision lasers--violations that may be "symptomatic of serious problems with your firm's manufacturing and quality assurance."

Terri warner talking to her daughter: This one's good.

Yet Terri Warner says it's not good enough.

Terri Warner: Some things are being hidden about this machine and the truth is not coming out.

Alcon finally notified the FDA about the serious injury to Terri Warner's eye 10 months after her surgery. By law, the company is supposed to do it in 30 days.

Terri Warner tucking in her grandson: 'Night Liam.

These days, Terri says she spends much of her time seeking out second opinions, trying to find a way to get her vision back.

Terri Warner: I'd like to see my grandson's face clearly-- just little things that you miss, you know...

Texas Woman Sues Maker of LADARVision

Victim says eyes were injured by Alcon Laser System

 

Dallas, TX (PRWEB) February 4, 2005 -- A Lubbock County, Texas woman is suing the Fort Worth maker of a laser system used by doctors to perform LASIK eye surgery. According to the lawsuit, Sandra Brown v. Alcon Manufacturing, L.T.D. and Alcon Laboratories, Inc., the LADARVision laser is defective (Case #236-209603-05 District Court Tarrant County Texas 236th Judicial District). The lawsuit accuses Alcon of ignoring warnings that may have prevented additional injuries.

 

A surgeon performed LASIK surgery on Dr. Brown, a fellow ophthalmologist, in April 2001, using the LADARVision laser. During the surgery, the laser performed erratically and removed too little tissue in an asymmetrical pattern from Dr. Brown’s eyes. As a result, she sustained permanent damage to her eyes resulting in limited vision. Unfortunately for Dr. Brown, at this time, her vision cannot be repaired by medical or surgical interventions.  

“I specifically waited for the LADARVision laser machine before having my surgery, and the wait cost me my vision,” says Dr. Brown. “I now have to live with damaged vision because of a defect in Alcon's laser. When I started looking into my problem, I realized that I was not alone and many other people have likewise been hurt by this same problem.”  

While horror stories associated with laser vision correction are not new, recent disturbing news about the Alcon LADARVision laser may cause victims to consider whether harm to their eyes was caused by the laser and not doctors and medical staff.  

“In the past, poor surgeries were usually blamed on the surgeon,” says attorney Joel Fineberg, who represents Dr. Brown. “There is now mounting evidence that the Alcon LADARVision laser is at the heart of many of these problems.”  

Surgeons throughout the country are questioning the effectiveness of the laser. In addition, an article authored by an Alcon consultant in the April 2003 issue of Opthalmology, reveals that patients treated with the LADARVision laser are twice as likely to need follow-up surgery. According to an investigative report in the London Times the rate of required retreatment might be even higher.  

“Patients go in expecting to come out with clearer vision, and many times they come out with permanent damage,” says Mr. Fineberg. “What we have here is a company that has decided to ignore serious concerns, raised by a physician, about the safety of their product.”  

To speak with Joel Fineberg about problems associated with Alcon’s LADARVision, contact Joel Fineberg at (214)219-8828 or Mike Androvett at (800)559-4534.

ALCON Malfunctions

01/09/2006

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=677401 

ALCON-ORLANDO TECHNOLOGY DRIVE LADARVISION 4000 OPTHALMIC EXCIMER LASER SYSTEM  Catalog Number 8065490084

Device Problem Error message given

 

Event Date 01/09/2006

Event Type Injury

Event Description

A system operator reports that during lasik surgery, the laser stopped firing at 88. 8% completion and could not be completed within the same session. Patient records provided did not include the pre-operative exam nor bcva measurements and the patient was deployed to iraq prior to the one-month post-operative exam.  Manufacturer Narrative The field service engineer was dispatched to the site to evaluate the system. He confirmed, but could not duplicate the reported issue. He adjusted the thyratron reservoir voltage , optimized the thyratron and conducted testing with over 60,000 shots fired without a mis-fire, pre-fire or uncommanded firing of the laser. System performed within specification at the time of verification. No conclusion can be made.  

01/26/2006 

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=680423 

ALCON - ORLANDO TECHNOLOGY CENTER LADARVISION 4000 OPHTHALMIC EXCIMER LASER SYSTEM  

Catalog Number 8065490084

Device Problem

Tracking Event Date 01/26/2006

Event Type Malfunction

Event Description The tracker stopped tracking a patient's eye at 88% during a customer lasik procedure. They were unable to complete the procedure within the same session, however, there was no patient impact/injury associated with this event.  Manufacturer Narrative H. 3. , h6. Evaluation summary: the field service engineer was dispatched to the site to evaluate the device. He was able to duplicate the difficulty with the tracker not tracking. He replaced the galvo box, dsp card, analog box, and completed an alignment of the tracker. Then he completed a system verification. The replaced parts were received in manufacturing, but the evaluation has not been completed.  

02/03/2006 

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=682670 

ALCON - ORLANDO TECHNOLOGY CENTER LADARVISION 4000 OPHTHALMIC EXCIMER LASER SYSTEM  

Catalog Number 8065490084

Device Problem Error message given

Event Date 02/03/2006

Event Type Malfunction Event Description A system operator reports an error message, "energy level too low", at approx 20% into a lasik procedure. They performed a gas change, which was unsuccessful, and were unable to complete the procedure within the same session. The pt's procedure was completed later the same day following the field service engineer's visit. There was no pt impact/injury associated with this event.  Manufacturer Narrative Eval summary: the field service engineer (fse) found the gas fill count at 'zero' and the customer was not able to complete any more gas changes. The fse added 2 gas fills from the gas cylinder reserve located on the system and was able to perform system calibration and complete a system verification. The customer was then able to continue with surgery.  

02/09/2006

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=686984  

ALCON - ORLANDO TECHNOLOGY CENTER LADARVISION 4000 OPHTHALMIC EXCIMER LASER SYSTEM  

Catalog Number 8065490006

Device Problem Error message given

 

Event Date 02/09/2006

 

Event Type Malfunction

 

Event Description While on-site for a service visit, the field service engineer observed the laser not firing during a surgical procedure and the procedure was not completed within the same session. It s not known wether there was pt impact/injury associated with this event.  Manufacturer Narrative H. 3. , h. 6. : evaluation summary: the field service engineer was at the site on a service call when the event happened. He examined the system and found the thyratron to be faulty. He replaced the laser chassis assembly, replaced the gas bottle and completed a system verification. The returned part was tests and evaluated by manufacturing and a faulty thyratron within the chassis was verified.

The Ladarvision has 97 device reports on the FDA MAUDE database for the period 2004-2006. They are very interesting, particularly all the ones describing lasers shutting down or failing to fire during a procedure, and some unusually large overcorrections.

MDRs filed in the Maude database during December about breakdowns of Ladarvisions.

Go to http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/search.cfm

From the FDA medwatch database:

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=651959

"A nurse reports that during lasik surgery, the screen froze. The site shut down the system and re-booted, but was unable to access the remainder of the patient's surgery plan. The procedure could not be completed during the same session. It is not known whether there was a patient impact/injury associated with this event. "

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=321365

Pt has undergone photorefractive keratectomy (prk) at hosp in a foreign country with a fda approved excimer laser, i. E. The apexplus of the co summit technology.

The purpose of the treatment was correction of myopia which was determined as follows: -7. 3 diopters of myopia (d) and -1. 75 d of astigmatism on the right eye and -6. 8 d of myopia and -1. 5 d of astigmatism on the left eye. The treatment was performed with an ablation zone of 6. 5 mm.

Up to today, at a distance of almost 5 years from the treatment, pt suffers from halos and glare and complains about bad vision at night. In order to collect more info about the device itself, rptr had a look at the documentation put on the internet and downloaded approval p930034 of 10/25/95, the only one that matched the device description and the date. Inside the documents rptr found some criteria which have to be met in order to ensure that the device is suitable for a certain pt.

In the fda letter to summit of 10/20/95 rptr found under restrictions of use that the device is suitable for "moderate nearsightedness (-1. 5 to 7. 0 diopters when concomitant astigmatism is no greater than 1. 5 diopters). ". In addition it is clearly specified as not indicated to correct high myopia (nearsightedness > -7. 0 d). So, as mentioned above, the actual values of myopia and astigmatism exceeded the specified ones. As far as it regards the ablation zone rptr found an indication that the device was approved for a 6. 0 mm ablation area, while during the treatment a 6. 5 mm diameter was used.

So rptr's first question is whether there were amendments to the approval p930034. According to which the corrected values would have been inside an admittable range of new values or was the device used off-label ie outside the indicated limits. Rptr understood from the literature published before procedure date that the problems, pt is reporting, could be due to optical zone edge effects, especially when the pupil is dilated.

According to a survey, performed on pt in 10/99, the ablation was of good homogenity, it was perfectly centered and it had an usuable optical area of 4 mm on the right eye and of 4. 5 mm on the left eye. Thus the dr stated on his report that the reason for the pt's problems has to be the pupillary diameter which is bigger than the treated area (rptr supposes he refers to the usable optical area and not to the abaltion zone).

So rptr's second question is whether fda issued some specifications or amendments to approval which deal with long term risks of debilitating symptoms related to the pupillary diameter, its dynamics and the dimensions of the ablation area.

From the FDA adverse events reporting database:

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=727223

Quote:

A surgeon reports one patient that was over corrected in his left eye following custom lasik surgery. A review of the patient records provided, indicat at 4-months post -op, this patient was over corrected by 3. 25 diopters and presented with 1. 75 diopters of induced astigmatism. One month later an enhancement was performed on the left eye. Three weeks following the enhancement, the over correction on the left eye had reduced to 1. 25 diopters and the induced astigmatism had resolved, leaving 1. 5 diopters of residual astigmatism. The patient did experience a 1-line decrease in bcva in the left eye during the post-operative period.

And of course, Pre-Market Approval For Alcon's LASERS

http://www.fda.gov/cdrh/pma/pmamay06.html 

P970043/S019

5/1/06

Real-Time LADAR™ 6000 Excimer Laser System

Alcon Laboratories, Inc. Orlando, FL 32826

Approval for changes in the LADARVision® 4000 System including a new configuration of the illumination system, upgrades to the laser computer and operating system, and various other hardware and software changes intended to address compliance with EMI requirements, manage component obsolescence, reduce maintenance requirements, and enhance ergonomic and user interface features. The device, as modified, will be marketed under the trade name LADAR™ 6000 Excimer Laser System.  

P970043/S020

5/1/06

Panel LADARVision® 4000 Excimer Laser System and the LADAR™ 6000 Excimer Laser System

Alcon Laboratories, Inc. Orlando, FL 32826

Approval for the LADARVision® 4000 Excimer Laser System and the LADAR™ 6000 Excimer Laser System. These devices use a 6.5 mm optical zone and a 9.0 treatment zone and are indicated for wave-front guided CustomCornea® laser assisted in-situ keratomileusis (LASIK): 1) for the reduction or elimination of hyperopia and hyperopic astigmatism of +0.75 D to less that +5.00 D of sphere with up to -3.00 D of cylinder (which has a magnitude less than or equal to the sphere in minus cylinder convention) and up to +5.00 cycloplegic spherical equivalent at the spectacle plane; 2) in patients 21 years of age or older; and 3) in patients with documented stability of refraction for the prior 12 months, as demonstrated by a change in sphere and cylinder of less than or equal to 0.50 D.  

P970043/S022

5/2/06

Panel LADARVision® 4000 Excimer Laser System and the LADAR™ 6000 Excimer Laser System

Alcon Laboratories, Inc. Orlando, FL 32826

Approval for the LADARVision® 4000 Excimer Laser System and the LADAR™ 6000 Excimer Laser System. These devices use a 6.5 mm optical zone and a 9.0 treatment zone and are indicated for wave-front guided CustomCornea® laser assisted in-situ keratomileusis (LASIK): 1) for the reduction or elimination of mixed astigmatism 1.00 D to less than 5.00 D cycloplegic cylinder magnitude at the spectacle plane, which is greater than the sphere magnitude, and the cylinder and sphere have opposite signs; 2) in patients 21 years of age or older; and 3) in patients with documented stability of refraction for the prior 12 months, as demonstrated by a change in sphere and cylinder of less than or equal to 0.50 D.  

P970043/S023

5/1/06

180-Day LADAR™ 6000 Excimer Laser System Alcon Laboratories, Inc. Orlando, FL 32826 Approval to increase the pulse repetition rate of the LADAR™ 6000 Excimer Laser from 60 Hz to 92 Hx.

Lasers or surgeons:  What’s really the cause of high retreatment rates?

 

http://www.eyeworld.org/article.php?sid=2267 

Satisfied users of Alcon Inc.’s LADARVision excimer laser abound, but other surgeons are convinced retreatments were too frequent after they used the system.  LADARVision detractors cite a study published in the April 2003 edition of Ophthalmology as evidence that they’re right. The study, authored by Peter Hersh, M.D., an Alcon (Forth Worth, Texas) consultant concluded that “patients treated on the LADARVision laser had almost twice the rate of retreatment (18.2%) compared with the Summit Apex Plus laser (9.7%),” which is no longer manufactured. 

See the full story at above link.

 

ALCON RECALLS

 

 

ALCON LABORATORIES, INC.

 

LADARVision Excimer Laser System:  CustomCornea software only. Class II. 

 

Reason:  A software error associated with the use of the Measuring Mode (ruler tool).  Vol. 15:9.

 

 

Alcon Recalls Systane Free Eye Drops

 

Friday December 15, 7:21 am ET 
Alcon Recalls Systane Free Liquid Gel Lubricant Eye Drops Due to Mold


FORT WORTH, Texas (AP) -- Eye-care products maker Alcon Laboratories Inc. on Thursday issued a voluntary recall of its Systane Free Liquid Gel lubricant eye drops.
Bottles of the lubricant that were returned to Alcon were found to have mold, although Alcon said developing an infection from the mold is unlikely.

 

Read The Story


 

FDA Posted Alcon Recall Information

 

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50119

Medical Device Recalls  Class 2 Recall  AcrySof® Intraocular Lens

Date Recall Initiated: December 14, 2006

Date Posted: February 15, 2007

Recall Number: Z-0431-2007

Product: AcrySof® Intraocular Lens

Code Information: Model MA60AC, serial number 989984.028

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 6201 South Fwy Fort Worth, Texas 76134-2001

Reason For Recall: Intraocular lenses exposed to extreme temperatures while in storage.

Action: The recall of the fifteen re-shipped lenses was conducted by telephone calls to the nine customers that had received the lenses. These calls were made on December 14, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: one unit 

Distribution: Nationwide

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50118

Medical Device Recalls  Class 2 Recall  AcrySof® ReSTOR® Intraocular Lens

Date Recall Initiated: December 14, 2006

Date Posted: February 15, 2007

Recall Number: Z-0430-2007

Product: AcrySof® ReSTOR®  Intraocular Lens

Code Information: Model MN60D3, Serial numbers: 940376.028; 945173.084; 945533.043; 945174.053; 944089.027; 942202.069; 940407.058; 940407.059; 942210.016; and 945537.073  

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 6201 South Fwy Fort Worth, Texas 76134-2001

Reason For Recall: Intraocular lenses exposed to extreme temperatures while in storage.

Action: The recall of the fifteen re-shipped lenses was conducted by telephone calls to the nine customers that had received the lenses. These calls were made on December 14, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 10 units

Distribution: Nationwide

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=49755 

Medical Device Recalls  Class 2 Recall  AcrySof® ReSTOR® Intraocular Lens

Date Recall Initiated: December 14, 2006

Date Posted: February 15, 2007

Recall Number: Z-0429-2007

Product: AcrySof® ReSTOR® Intraocular Lens

Code Information: Model SN60D3, Serial numbers: 968290.039; 934317.012; 934317.013; and 948332.080.

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 6201 South Fwy Fort Worth, Texas 76134-2001

Reason For Recall: Intraocular lenses exposed to extreme temperatures while in storage.

Action: The recall of the fifteen re-shipped lenses was conducted by telephone calls to the nine customers that had received the lenses. These calls were made on December 14, 2006. Firm Initiated recall is ongoing.

Quantity in Commerce: 4 units

Distribution: Nationwide

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50436

Medical Device Recalls  Class 2 Recall  Custom-Pak® Surgical Packs

Date Recall Initiated: December 22, 2006

Date Posted: March 01, 2007

Recall Number: Z-0564-2007

Product: Alcon Custom-Pak®, part #11148-02, containing BD Beaver? Mini-Blade (part #BD6400 or part #BD6900); individual blades repackaged into custom ophthalmic surgical packs and resterilized by Alcon Laboratories, Inc., Houston, TX.

Code Information: Lot #632178H, 634400H and 642229H

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 9965 Buffalo Speedway Houston, Texas 77054-1309

Reason For Recall: Individually packaged surgical blades, labeled as sterile, found with incomplete seals; blades purchased for use in custom surgical packs.

Action: Customers notified of recall via phone on 12/22/06, with follow-up fax and letter. A revised notification was made via phone and fax to each customer on 12/26/06. Customers instructed not to use blades and to return blades for a replacement. Recall to the user/hospital level. Firm Initiated recall is ongoing.

Quantity in Commerce: 65 custom surgical packs.

Distribution: Custom surgical packs sold to hospitals in AR, MN, NY, TX and WI.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50435

Medical Device Recalls  Class 2 Recall  Custom-Pak® Surgical Packs

Date Recall Initiated: December 22, 2006

Date Posted: March 01, 2007

Recall Number: Z-0563-2007

Product: Alcon Custom-Pak®, part #6515-51, containing BD Beaver? Mini-Blade (part #BD6400 or part #BD6900); individual blades repackaged into custom ophthalmic surgical packs and resterilized by Alcon Laboratories, Inc., Houston, TX.

Code Information: Lot #633317H, 645074H, and 629784H

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 9965 Buffalo Speedway Houston, Texas 77054-1309

Reason For Recall: Individually packaged surgical blades, labeled as sterile, found with incomplete seals; blades purchased for use in custom surgical packs.

Action: Customers notified of recall via phone on 12/22/06, with follow-up fax and letter. A revised notification was made via phone and fax to each customer on 12/26/06. Customers instructed not to use blades and to return blades for a replacement. Recall to the user/hospital level. Firm Initiated recall is ongoing.

Quantity in Commerce: 30 custom surgical packs.

Distribution: Custom surgical packs sold to hospitals in AR, MN, NY, TX and WI.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50434

Medical Device Recalls  Class 2 Recall  Custom-Pak® Surgical Packs

Date Recall Initiated: December 22, 2006

Date Posted: March 01, 2007

Recall Number: Z-0562-2007

Product: Alcon Custom-Pak®, part #4917-54, containing BD Beaver? Mini-Blade (part #BD6400 or part #BD6900); individual blades repackaged into custom ophthalmic surgical packs and resterilized by Alcon Laboratories, Inc., Houston, TX.

Code Information: Lot #629460H, 631237H, 632356H and 642330H.

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 9965 Buffalo Speedway Houston, Texas 77054-1309

Reason For Recall: Individually packaged surgical blades, labeled as sterile, found with incomplete seals; blades purchased for use in custom surgical packs.

Action: Customers notified of recall via phone on 12/22/06, with follow-up fax and letter. A revised notification was made via phone and fax to each customer on 12/26/06. Customers instructed not to use blades and to return blades for a replacement. Recall to the user/hospital level. Firm Initiated recall is ongoing.

Quantity in Commerce: 80 custom surgical packs.

Distribution: Custom surgical packs sold to hospitals in AR, MN, NY, TX and WI.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=50433

Medical Device Recalls Class 2 Recall Custom-Pak® Surgical Packs 

Date Recall Initiated: December 22, 2006

Date Posted: March 01, 2007

Recall Number: Z-0561-2007

Product: Alcon Custom-Pak?, part #2638-17, containing BD Beaver? Mini-Blade (part #BD6400 or part #BD6900); individual blades repackaged into custom ophthalmic surgical packs and resterilized by Alcon Laboratories, Inc., Houston, TX.

Code Information: Lot #627618H and 636380H

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 9965 Buffalo Speedway Houston, Texas 77054-1309

Reason For Recall: Individually packaged surgical blades, labeled as sterile, found with incomplete seals; blades purchased for use in custom surgical packs.

Action: Customers notified of recall via phone on 12/22/06, with follow-up fax and letter. A revised notification was made via phone and fax to each customer on 12/26/06. Customers instructed not to use blades and to return blades for a replacement. Recall to the user/hospital level. Firm Initiated recall is ongoing.

Quantity in Commerce: 27 custom surgical packs.

Distribution: Custom surgical packs sold to hospitals in AR, MN, NY, TX and WI.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=49998

Medical Device Recalls  Class 2 Recall  Custom-Pak® Surgical Packs

Date Recall Initiated: December 22, 2006

Date Posted: March 01, 2007

Recall Number: Z-0560-2007

Product: Alcon Custom-Pak?, part #10975-02, containing BD Beaver? Mini-Blade (part #BD6400 or part #BD6900); individual blades repackaged into custom ophthalmic surgical packs and resterilized by Alcon Laboratories, Inc., Houston, TX.

Code Information: Lot #649244H

Recalling Firm/Manufacturer: Alcon Laboratories, Inc 9965 Buffalo Speedway Houston, Texas 77054-1309

Reason For Recall: Individually packaged surgical blades, labeled as sterile, found with incomplete seals; blades purchased for use in custom surgical packs.

Action: Customers notified of recall via phone on 12/22/06, with follow-up fax and letter. A revised notification was made via phone and fax to each customer on 12/26/06. Customers instructed not to use blades and to return blades for a replacement. Recall to the user/hospital level. Firm Initiated recall is ongoing.

Quantity in Commerce: 4 custom surgical packs.

Distribution: Custom surgical packs sold to hospitals in AR, MN, NY, TX and WI.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRes/res.cfm?ID=41818

Medical Device Recalls   Class 2 Recall  Alcon Custom Pak

Date Recall Initiated: September 02, 2005

Date Posted: September 21, 2005

Recall Number: Z-1575-05

Product: Lasik Custom Pak containing 1 dual tip irrigator, 8 ports, 16 G, 2 packs spears, eye, ocucel, 5S, PVA, 1 cover, support, tray 2.2MIL 6FD, and 2 dressings, tegaderm, 2 3/8 x 2 3/4. All contents considered sterile unless package is opened or damaged.RX Only. Part number 10162-01. (The Vidaurri LASIK Flap Irrigators are included in the firm's Alcon Custom Pak Part Number 10162-01 under the description of dual tip irrigator, 8 ports, 16G.)

Code Information: Lot numbers: 520522H, 511655H, and 489635H

Recalling Firm/Manufacturer: Alcon Research, Ltd 6201 South Fwy Fort Worth , Texas 76134-2001

Reason For Recall: Unknown residue noted on suface of flap irrigators incorporated into cusom paks.

Action: Firm notified consignee by letter on 9/2/2005. Firm Initiated recall is ongoing.

Quantity in Commerce: 75 units

Distribution: Lake Charles, LA

Effect of beam size on the expected benefit of customized laser refractive surgery

 J Refract Surg. 2003 Jan-Feb;19(1):15-23.

Guirao A, Williams DR, MacRae SM

University of Murcia, Murcia, Spain. This email address is being protected from spambots. You need JavaScript enabled to view it.

PURPOSE: Customized laser surgery attempts to correct higher order aberrations, as well as defocus and astigmatism. The success of such a procedure depends on using a laser beam that is small enough to produce fine ablation profiles needed to correct higher order aberrations.

METHODS: Wave aberrations were obtained from a population of 109 normal eyes and 4 keratoconic eyes using a Shack-Hartmann wavefront sensor. We considered a theoretical customized ablation in each eye, performed with beams of 0.5, 1.0, 1.5, and 2.0 mm in diameter. We then calculated the residual aberrations remaining in the eye for the different beam sizes. Retinal image quality was estimated by means of the modulation transfer function (MTF), computed from the residual aberrations. Fourier analysis was used to study spatial filtering of each beam size.

RESULTS: The laser beam acts like a spatial filter, smoothing the finest features in the ablation profile. The quality of the correction declines steadily when the beam size increases. A beam of 2 mm is capable of correcting defocus and astigmatism. Beam diameters of 1 mm or less may effectively correct aberrations up to fifth order.

CONCLUSION: Large diameter laser beams decrease the ability to correct higher order aberrations. A top-hat laser beam of 1 mm (Gaussian with FWHM of 0.76 mm) is small enough to produce a customized ablation for typical human eyes.

Commercially Approved Wavefront-guided Custom Ablation: Second Year in Review:

The Pupil is a Moving Target: Centration, Repeatability, and Registration

Journal of Refractive Surgery  Vol. 20   No. 5   September/October 2004

Eric Donnenfeld, MD

PURPOSE: To evaluate the ability to accurately center and register wavefront data to provide effective custom wavefront application for vision correction.

METHODS: Centration images were obtained of 40 undilated pupils at 5 different illumination levels using the Alcon LADARWave aberrometer (Alcon Laboratories Inc, Fort Worth, Tex). Pupil position relative to the limbus was determined for all eyes under all levels of illumination. Variability in centration of the pupil was based on difference in magnitude of offset between pupil center and limbal center. Human operators were compared to a computerized limbus recognition system through repeatability testing using 10 different images of one eye of a single patient.

RESULTS: As determined by human operators, the pupil center in undilated pupils shifted a mean of 175 µm between the lowest level and the highest level of illumination (range 34 to 335 µm [standard deviation 84 µm]). Repeatability testing suggests human measurements can accurately position the pupil to within approximately 50 µm using current technology. Computer image processing using limbus recognition software appears equal or superior to manual pupil centration.

CONCLUSIONS: The pupil center can have a significant change in position with changing illumination. Wavefront data must be centered on a fixed eye structure rather than the pupil center to ensure that wavefront data captured in scotopic light are appropriately matched to the pupil in the photopic light used at surgery. The goal is to avoid clinically significant decentration of the wavefront between capture and excimer laser application. [J Refract Surg 2004;20:S593-S596]

AUTHORS: From Ophthalmic Consultants of Long Island, TLC Laser Centers, New York. Dr Donnenfeld is a consultant with Alcon Laboratories Inc.

Correspondence: Eric Donnenfeld, MD, 2000 N Village Ave #402, Rockville Centre, NY 11570. Tel: 516.766.2519; Fax: 516.766.3714.

My thoughts: A letter written regarding B&L

 

For 14 years I was involved in the development of the MicroKeratome that were marketed by Bausch & Lomb. I had a great deal of experience with TLC when I worked as the service department supervisor for Bausch & Lomb. 13 years ago I started worked on the prototypes for the ACS MicroKeratome and 3 years ago I was there when Bausch & Lomb bought Hansa Research & Development Corporation, the true developer.

I was the production supervisor in charge of manufacturing parts up until May of 2002. I actually had a hand in the development of the ACS and Hansatome. I am probably one of the top 5 individuals with the most knowledge about its problems and shortcomings. I was discarded during restructuring in May as the local plant began a series of cutbacks.

About TLC? MicroKeratome returned for service from TLC were some of the worst kept medical devices imaginable. Dirty and beat up by a group of doctors that share equipment like you rent bowling shoes. The problem with a group of people sharing the use of delicate equipment is that nobody cares about its upkeep. Units were treated like tools, wrenches and screwdrivers, and tossed around like the toolbox in the trunk of your car. The people at TLC were the worst to deal with. Demanding quick fixes to destroyed equipment and the blame was always the equipment never the user.

Bausch & Lomb has now developed it's own more serious problems. In January of 2001 a new plant manager took over the facility here in Miami, Florida where the first MicroKeratome was built and where the Hansatome is produced.

From then till now that facility has undergone a series of cutbacks that affected quality and will be the end of the Hansatome project. That new manager had a personal falling-out with the previous manager and decided to replace the entire power structure of the facility to spite him. He has now done that by neutralizing 5 key people. Unfortunately for the project he has neutralized the supporting knowledge base. The people building Hansatomes were once surgical instrument makers and machinist. Now the device is built by housewives and teenagers in an assembly line production. You can figure out what happened to the quality.

Anyway this last year the production has gone down hill fast and here is a copy of my letter to the FDA in June, I fear they will not take is seriously. This facility needs attention.:

Bausch & Lomb Miami

The Bausch & Lomb facility at  7790 NW 55th St.

in Miami Florida is engaged in the production of the surgical instrument known as the Hansatome Micro Keratome. In this last year the quality of the product has deteriorated to a dangerous level. This effort to reduce cost, cut corners and implement assembly line type manufacturing has now out weighed the need to maintain quality, in this product that actually cuts the human eye. Actual patient injuries have occurred as a result of this effort to cut cost while boosting output. The Repair Dept. covers those tracks. Micro Rings and Micro Heads are being produced in volume without the necessary Quality Controls. The current Quality Manager is in the process of being replaced for voicing his concerns.

The rush to bring the new Z-Heads, Micro Suction Rings and the new 20MM Micro Suction Rings into production, was driven by Marketing and should have required a new 510(k). All other factors take a back seat to that need to hit the market with a new generation device. We are engaged in developing the new prototypes and at the same moment the plant manager is cutting resources. Reducing wages for supervisors and reduced hours for employees.

Reduced availability of tools and equipment. Cutting corners. Gages, measuring tools and cutting tools are in short supply. SPC is non existent and created after the fact as needed.

The design measurements and calculations for the calibration of the Z-Heads are flawed. The prototypes used in the clinical tests were re labeled several times since they did not produce the expected results. They did not cut the correct thickness as predicted by engineering so the numbers on the heads were changed several times. The design was never reevaluated and under pressure from the plant manager the project pushed forward to production and product release in order to meet his timeline. The actual heads used in the clinical evaluation do not match the manufacturing drawings for the release.

Many small changes have gone undocumented in the effort to push forward.

This device is claimed to cause less compression on the flap when in fact it increases the compression of the entire eye and it is much greater pressure than the ACS unit. Several design changes have inched the Micro Keratome head closer to the eye increasing the IOP. So many Micro Heads were produced so fast that the documentation could not keep up causing heads with similar labels in inventory to have differing dimensions. This creates confusion when calibrating and installing these heads in new and service units.

The manufacturing process for Micro Suction rings and the new 20MM Ring has never been perfected even though production of the rings has increased. The development suffered from cutbacks. The FAIR's on the 20mm rings were done long after the rings were in clinical testing and were not done on the same rings used in the testing. On the Micro Suction rings, discrepancies in the measurements that control the exposure of the cornea above the ring have caused many Free Flaps as noted by the service department. Quality control in the manufacturing is lacking because of increased volume and cutbacks.

Many rings have varying dimensions. Defective rings are taken out of service or modified when found in service units.

There are massive across the board discrepancies in documentation of Prints, PCPs, SOPs and manufacturing procedures that are incorrect. Actual print dimensions are in error in many cases. This is made worse by cutbacks and restrictions in an effort to save money. GMP and ISO are the goals but the facility is in a state of disarray at this moment. The employees are working blind with an ever growing pressure by the manager to produce more volume in less time. When B&L bought this company 2 years ago documentation was minimal. Much of it was created immediately by a remote engineering department in many cases by people with no knowledge of the device. It was incomplete and flawed and in need of repair. In the last 2 1/2 years only small progress has been made in correcting the documentation and in the last year that correction process has been all but abandon. Procedures for such things as Part Machining, Assemble, Heat Treating, Hardness Testing and Servicing are in need of attention. These documents are incomplete and not understood by the employees. This is due to lack of resources, cutbacks in financing and personnel, lack of proper training and the unyielding pressure to produce more with less and to do it in less time.

Steve ____

X Production Supervisor Bausch & Lomb Miami

 

Bausch & Lomb – Technolas 217A

http://www.fda.gov/cdrh/pdf/p990027s004b.doc 

Summary of Safety and Effectiveness Data

The occurrence rate for the symptoms dryness (22.6% vs. 10.5%, p<0.0001), gritty feeling (6.8% vs 2.6%), fluctuation of vision (14.7% vs. 5.7%, p-value = 0.0005), and variations of vision in dim light (18.1% vs. 27.9%, p<0.0032) were higher at the 6 month visit than at the preoperative visit.

 

From (on or about) February of 1996 until the date of October 11, 2006, it is alleged Nidek and the following doctors used "adulterated" lasers to perform Hyperopic (farsightedness) Laser in Situ Keratomilesis (“LASIK”) and/or Hyperopic PhotoRefractive Keratectomy (“PRK”) with a NIDEK EC-5000 Excimer Laser System prior to FDA approval:

 

NIDEK CO. LTD.; NIDEK INCORPORATED; NIDEK TECHNOLOGIES INCORPORATED; MANOJ V. MOTWANI, M.D., GARY M. KAWESCH, M.D., LINDA VU, M.D., JOSEPH LEE, M.D., FARZAD YAGHOUTI, M.D., RANDA M. GARRANA, M.D., THOMAS S. TOOMA, M.D., PAUL C. LEE, M.D., KEITH LIANG, M.D., ANTOINE L. GARABET, M.D., WILLIAM ELLIS, M.D., GREGG FEINERMAN, M.D., MICHAEL ROSE, M.D., JOHN KOWNACKI, M.D., STEVEN MA, M.D., Estate of GLENN A. KAWESCH, M.D., TLC VISION CORPORATION also dba TLC LASER EYE CENTERS, INC.; CALIFORNIA CENTER FOR REFRACTIVE SURGERY, A MEDICAL CORPORATION; LASER EYE CENTER MEDICAL OFFICE INC.; SOUTHWEST EYE CARE CENTERS INC.; and DOES 1 through 1000, inclusive.

Read the Complaint

STAAR Surgical Provides Update on Toric ICL Application With FDA

MONROVIA, Calif., Feb. 6 /PRNewswire-FirstCall/ -- STAAR Surgical Company today provided an update on the status of the Company's submission to the U.S. Food and Drug Administration (FDA) for approval of its Visian TICL(TM), a toric implantable Collamer(R) lens designed to treat both myopia and astigmatism. STAAR announced that its representatives met with the staff of the FDA Office of Device Evaluation on January 31, 2007 to discuss the FDA's comments on STAAR's Supplemental Premarket Approval application for the TICL received by letter on November 20, 2006. At the meeting, the FDA staff indicated that, because the TICL is the first toric phakic implantable lens to be reviewed, STAAR's amended application for the TICL would be submitted to the Ophthalmic Devices Panel of the Center for Devices and Radiological Health for evaluation.

Read The FULL STORY

http://www.ophmanagement.com/article.aspx?article=86298

 

 


Excerpt:

Though the exact cause of TLS is still uncertain, some surgeons believe that the inflammation is caused by necrotic cellular debris, a byproduct of the gas bubbles that are formed to create the flap. Others speculate that the cause may be inflammatory cykotines migrating from the flap interface and sidewall to the perilimbal sclera and iris base.

 

Flap dimensions created with the IntraLase FS laser

J Cataract Refract Surg. 2004 Jan;30(1):26-32

"Two slipped flaps and 20 cases of interface inflammation occurred early in the series".

 

 

 

 

http://www.osnsupersite.com

OCULAR SURGERY NEWS 10/1/2004

Excerpt:

Some users of the IntraLase femtosecond laser keratome first noticed the complication when they began working with the system more than 2 years ago. Since then, the phenomenon has gone under multiple names.

“Patients would walk into the office with two pairs of sunglasses on and a baseball cap,” said Brian R. Will, MD, director of Will Vision & Laser Centers in Vancouver, Wash. “No one knew what to make of the symptoms — light sensitivity, preserved visual acuity and no slit-lamp findings.”

Dr. Will coined the term track-related iridocyclitis and scleritis (TRISC) syndrome to describe the condition he thought was due to gas bubbles and debris migrating toward the limbus during LASIK with IntraLase.

Karl G. Stonecipher, MD, another early user of IntraLase, called the syndrome good acuity plus photophobia (GAPP). “It’s similar to the late-onset inflammation we once saw with PRK,” Dr. Stonecipher, of Greensboro, N.C., told Ocular Surgery News. He believed that the inflammation was due to activated keratocytes in the interface.

As time passed, speculation grew among users. Surgeons became concerned about the cause and identity of the rare aftereffect of IntraLase flap creation.

“It was scary when we didn’t know what it was — frightening to the surgeon and the patient,” said Daniel S. Durrie, MD, director of Durrie Vision in Overland Park, Kan.

In July, IntraLase surveyed users of its system and discovered that the apparent photophobia phenomenon was unique to LASIK cases using IntraLase for creation of the flap.

“Transient light sensitivity, or TLS, is the term coined by IntraLase to describe the complication,” Dr. Durrie said.

 

http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=16386969&query_hl=7&itool=pubmed_docsum

American Journal of Ophthalmology
Volume 141, Issue 1 , January 2006, Page 1
Kuang-Mon Ashley Tuan OD, PhDa, Dimitri Chernyak PhDa and Sandy T. Feldman MD, MSb, ,

a) VISX Inc, Santa Clara, California
b) ClearView Eye and Laser Medical Center, San Diego, California.

 

Purpose: To evaluate the accuracy of the diagnostic capabilities of optical metrics generated from wavefront measurements in relationship to post–laser-assisted in situ keratomileusis (LASIK) visual complaints as expressed and drawn by patients.

Design: Retrospective analysis and observational case series.

Methods: Patient wavefront data from an investigational device exemption study for wavefront-guided ablations were used to derive normative modulation transfer function (MTF), encircled energy (EE), and Strehl ratio. These optical metrics and their point-spread functions (PSF) were compared with data from five postoperative patients with night vision complaints. Patients were asked to draw their symptoms, which were elicited by testing with a Fenthoff muscle light, while using their best-corrected distance vision. 

Results: The MTF, EE, and Strehl ratio of most patients were markedly different from those of the averages of 208 normal myopic eyes before and after LASIK surgery. The spatial extent of the PSF correlated positively with the severity of the visual complaints. Wavefront-derived PSFs were markedly similar to the patients’ drawings.

Conclusions: The results of this study demonstrate the diagnostic capability of the wavefront system in predicting visual symptoms and complaints of patients with high-order aberrations. Objective visual metrics from patients with night vision complaints were different from those of normal myopic eyes that had undergone LASIK procedures.

Excerpts: If the human eye were a perfect optical system, the appearance of a point source of light would be limited only by diffraction effects, and the source would appear as a single point to the observer. In addition to spherocylindrical components, the optical system of the human eye generates other complex optical aberrations, which contribute to the distortion of retinal images and determine the quality of the image formed on the retina. The optical imperfections of the eye cause rays of light traveling from a point source through the eye’s optics to intercept the retina at different locations, thereby blurring the appearance of the point. The distorted appearance of the point on the retina is called a point-spread function (PSF).

The recent development of wavefront aberrometers for use in ophthalmology has given clinicians an objective measurement method for optical aberrations other than sphere and cylinder. The wavefront maps generated by such devices represent deviations from the ideal diffraction-limited optical systems and enable the physician to precisely diagnose visual impairment. In addition to guiding customized refractive surgery, wavefront sensors can be used to evaluate the source of visual complaints. The appearance of the PSF can be computed directly from the wavefront measurement and corroborated by the patient with a simple drawing.

In recent years, much emphasis has been placed on the use of PSF and PSF-based metrics to objectively evaluate the quality of vision (Gross E, Wavefront Congress 2004, Abstract).3 and 4 Whereas the wavefront map (which is analytically defined by methods that include the Zernike coefficients) describes the aberrations in the pupillary plane, the PSF describes aberrations in the retinal plane. Retina-based descriptions of aberrations have been shown to correlate strongly with subjective visual metrics, such as visual acuity and contrast sensitivity.

In addition to correlating with subjective measures of visual performance, the PSFs are valuable tools for understanding visual symptoms, such as ghost images, which occur with multiple peaks of the PSF, or halos and starbursts, which may also be inferred from the appearance of the PSF. The purpose of this study is to determine whether quantitative analysis of PSFs is helpful to the clinician’s understanding of nighttime visual complaints.

Methods: This study was a retrospective analysis and observational case series. Two groups of patients were included in this study. The first group of eyes were nonsymptomatic and were used to establish normative values. Data from this group were gathered from 208 eyes from the six clinical sites in the United States that participated in the Institutional Review Board–approved investigative device exemption study for the CustomVue wavefront-guided laser vision correction procedure (VISX Inc, Santa Clara, California, USA). The second group of patients, all of whom had night complaints after laser-assisted in situ keratomileusis (LASIK), was recruited from the practice of ClearView Eye Center, San Diego, California, USA. 
 
The purpose of this part of the study was to see whether sketches of the point source of light made by patients with night vision complaints would be reasonably similar to the polychromatic PSF plot created by the WaveScan aberrometer, and to determine whether their optical metrics were different from the normal population. Inclusion criteria included a complaint of glare, halo, starburst at night, or a poorer quality of vision. Patients were also required to be willing to sketch their symptoms.

WaveScan version 3.5 software was used to convert the wavefront data into PSF. The PSF was computed by using multiple wavelengths to accurately simulate the appearance of white light and to account for chromatic aberrations of the eye. The Stiles-Crawford effect of the first kind, which depicts the probability of photon absorption by photoreceptors as a function of ray position from the pupil center, was also taken into account. Additionally, absorption spectra of the three retinal photoreceptor types were used to correctly weight different wavelengths in the PSF computations. Finally, spacing of the retinal receptor mosaic was used to determine the maximum spatial frequency that is used in the rendition of the PSF.

An important issue in assessing retinal image quality is a realistic computation of the PSF. The above method enables the instrument to create realistic renditions of the appearance of a white light point source on the image plane, which is the polychromatic PSF. An optical system with little aberration will generate a compact and high-intensity point source on the image plane. Therefore, the brain would be expected to perceive sharp images and resolve small details. A highly aberrated eye will form a PSF that spreads out and has lower contrast within the retinal plane. In this case, the brain would perceive a dim and blurry image resulting in low resolution and poor visual performance.

To effectively compare the visual impact of different PSFs, it is necessary to quantify PSF or PSF plots. To date, there is no consensus in the vision science community as to a standardized method for quantifying the visual impact of measured wavefront aberration. However, Strehl ratio, encircled energy (EE), and modulation transfer function (MTF) are the commonly used optical metrics believed to provide useful information on perceptual image quality and therefore predict visual performance.3, 4, 7 and 8 For this study, the PSF was broken down into two parts for visual evaluation: circle of blur; and the length of the vertical and horizontal strikes from the center. Optical metrics such as Strehl ratio, EE, and MTF were derived from the PSF8 with the intention of quantifying the visual impact of the PSF.

Strehl ratio is defined as the ratio of the peak intensities of the aberrated PSF and the diffraction-limited PSF. EE is the two-dimensional integral of the PSF. EE represents the proportion within a given radius of the image center and the total energy from a point source. EE was calculated at 1, 3, 5, 8, and 10 min of arc. MTF is the module of Fourier transform of the PSF. MTF represents contrast information, and it varies with spatial frequencies. MTF was calculated from 3 cycles per degree (cpd) to 30 cpd for this study. An MTF of 1 indicates that 100% contrast was maintained after the light passed through the optical system.
The normative value of the optical metrics described above was used for comparison with patients with postoperative visual symptoms. Lower-order wavefront information was deleted from the calculation to remove optical degradation arising from refractive error.

Results: All patients were healthy men ranging in age from 31 to 43. Patient demographic information is listed in Table 1. Their drawings and corresponding PSFs are presented in Figure 1. The postoperative follow-up period ranged from 6 months to 3 years. Postoperative uncorrected vision ranged from 20/30 to 20/20 and was correctable in each eye to 20/20 or better. However, patients reported visual symptoms at follow-up visits. Unfortunately, not all of the patients’ preoperative visual information was available.

Discussion: It is well known that patients with nighttime vision complaints may nevertheless have excellent uncorrected acuity. The clinician does not have many clinical tests outside of questionnaires to assess the extent of symptoms such as glare, halo, and starburst. Additionally, literature on clinical methods with which to demonstrate night complaints or quantify the visual disturbance is scarce. In this study, we have demonstrated that optical metrics derived from polychromatic PSF are a reliable quantitative method for the validation of night vision complaints.

The PSF diagram represents the appearance of one small spot of light after it passes through an optical system. The authors found the WaveScan-generated PSF to be consistently similar to the subjective visual experience of the study subjects despite differences in the artistic abilities of the patients. The polychromatic PSF plots derived from the wavefront measurements bear marked similarities to the drawings of the patients. The PSF plots show diffraction effects and some subthreshold light. Diffraction-based spatial frequencies are missing from drawings because they are not perceived. Additionally, the spacing of the photoreceptors limits visual acuity and spatial resolution of the retina. Occupation, personality, and level of detail orientation also appear to help determine the way patients perceive their visual quality. Therefore, patients with similar PSFs can have different reactions to their quality of vision. Nevertheless, the similarity between the PSF maps of subjects who have visual symptoms and their drawings are evident.

Optical metrics generated from the PSF were used to create a quantitative description of a PSF diagram. Optical metrics apply summations from different areas and orientations, and the result is a directionless quantitative number. The authors chose to use three metrics: Strehl ratio, EE, which signifies the intensity of the brightness of the image, and MTF, which represents contrast information. The study patients were compared with the normative values of EE and MTF generated from a cohort that had never undergone refractive surgery. Most optical metrics in the study patients were significantly worse than the normative values.

Lowered EE and MTF in the left eye of patient 4 are marginally significant, and there is a high amount of negative spherical aberration. The PSF maps are more vertically distributed. After averaging in all directions, the effect on overall optical metrics was reduced, which may explain why patient 4 had both positive visual symptoms but was within the normal limits of EE and MTF. However, patient 4’s PSF map shows an asymmetrical pattern in which the vertical dimension spreads outside the normal range. This extensive vertical spread of light accounts for the patient’s visual symptoms and correlates with his drawings.
 
After examining the visual functions of seven patients who underwent LASIK procedures, Holladay and coauthors hypothesized that corneas with an oblate shape or positive spherical aberration contributed to the decrease of visual functions. In our study patients, patients 1 and 4 had significant negative spherical aberration or prolate cornea (−0.41 μm and −0.25 μm, respectively) but also had visual symptoms. Spherical aberration was one of the few “abnormal” optical metrics for patient 4. This observation suggests that negative spherical aberration is not necessarily associated with visual satisfaction. On the contrary, when spherical aberration is present in sufficient magnitude, it could cause visual dissatisfaction.

In our study patients, some patients’ uncorrected visual acuity nevertheless experienced persistent visual symptoms, even with their best-corrected vision.

Polychromatic PSF plots generated from VISX’s polychromatic wavefront algorithms showed high correlation with the patients’ subjective visual experiences.

In conclusion, this study shows that wavefront systems are capable of predicting nighttime visual symptoms and complaints of patients whose visual acuities are otherwise good. Polychromatic PSF and the optical metrics derived from it are valuable diagnostic tools for predicting quality of vision and for evaluating the optical quality of an eye.

The authors conclude that plastic particles commonly found under the LASIK flap are unaltered after 1 year. Plastic is not biodegradable. Wouldn't patients, then, have plastic particles under the flap for life?

http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=14711708&query_hl=3

Ivarsen A, Thogersen J, Keiding SR, Hjortdal JO, Moller-Pedersen T. 2004
Ophthalmology. Jan;111(1):18-23.

 

PURPOSE: To investigate the origin, composition, and persistence of the interface particles that frequently are observed after LASIK.

DESIGN: Small case series and experimental animal study.

METHODS: Four patients received LASIK using a Schwind Supratome (Schwind, Kleinostheim, Germany) and a MEL 70 G-Scan excimer laser (Asclepion, Jena, Germany) and were examined over the course of 1 year using slit-lamp and in vivo confocal microscopy. Four rabbits received a monocular microkeratome incision and were examined immediately after surgery without lifting the flap. After monthly evaluation for 4 months using in vivo confocal microscopy, 2 corneas were processed for histologic analysis and were sectioned serially. To measure the iron content, atomic absorption spectrometry was performed on 2 operated and 2 unoperated rabbit corneas. The chemical composition of the metal and plastic parts of the microkeratome blade was identified using energy dispersive x-ray fluorescence (metal part), and Raman and infrared spectroscopy (plastic part). Before and after oscillation in air, the microkeratome blade and motor-head were examined using light and fluorescence microscopy. In serial sections, interface particles were identified by fluorescence microscopy and their chemical composition was determined using Coherent Antistokes Raman Scattering microscopy.

RESULTS: In LASIK patients, thousands of brightly reflecting particles (up to 30 micro m) were observed throughout the interface. The highest particle density was detected where the microkeratome blade had first entered the cornea. Both in the center and at the flap edge, the morphologic features, distribution, and density of these particles remained unaltered throughout the 1-year observation period. In rabbit corneas, interface particles were observed immediately after the microkeratome incision, even though the flap had not been lifted. These particles were similar to those observed in humans and persisted unaltered throughout the study. The operated and unoperated rabbit corneas had comparable iron content, demonstrating that the particles were not fragments of the uncoated steel blade. Only a few particles were observed on the unused microkeratome motor head and blade, whereas numerous fluorescent particles were detected after oscillation in air, the amount of particles increasing with oscillation time. Interestingly, the only fluorescent part of the microkeratome was the plastic segment of the blade. This plastic (polyetherimide) emitted fluorescence identical to that of the observed particles, whereas all metal parts of the microkeratome blade and motor head were nonfluorescent. In serial sections, interface particles showed fluorescent properties equivalent to polyetherimide and exhibited molecular resonance at 1780 and 3100 cm(-1), in accordance with the Raman spectrum of polyetherimide.

CONCLUSIONS: Numerous plastic particles are generated during microkeratome oscillation and are deposited at the interface during LASIK. The particles persist unaltered for at least 1 year.

...and its correlation with visual symptoms, refraction, and topography:

 

http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=15019317&query_hl=3

 

Ophthalmology. 2004 Mar;111(3):447-53.

Chalita MR, Chavala S, Xu M, Krueger RR.

The Cole Eye Institute, Cleveland Clinic Foundation/I32, 9500 Euclid Avenue, Cleveland, OH 44195, USA.

 

 

PURPOSE: To evaluate the information assessed with the LADARWave wavefront measurement device and correlate it with visual symptoms, refraction, and corneal topography in previously LASIK-treated eyes.

 

PARTICIPANTS: One hundred five eyes (58 patients) of individuals who underwent LASIK surgery were evaluated.

 

DESIGN: Retrospective, noncomparative case series. 

 

 

MAIN OUTCOME MEASURES: Complete ophthalmologic examination, corneal topography, and wavefront measurements were performed. Correlations were made between the examinations and symptoms.

 

 

METHODS: Wavefront measurements were assessed with the LADARWave device. Manifest, cycloplegic refraction, and topographic data were compared with wavefront refraction and higher order aberrations. Visual symptoms were correlated to higher order aberrations in 3 different pupil sizes (5-mm, 7-mm, and scotopic pupil size). Pearson's correlation coefficient and generalized estimating equations were used for statistical analysis.

 

 

RESULTS: In post-LASIK eyes, wavefront refraction components were poorly correlated to manifest and cycloplegic components. The comparison between manifest, cycloplegic, and wavefront refraction with total amount of higher order aberrations showed no strong correlation. The comparison between topography and manifest, cycloplegic, and wavefront refraction did not show strong correlation. Visual symptoms analysis showed correlation of double vision with total coma and with horizontal coma for the 5-mm and 7-mm pupil size; correlation between starburst and total coma for the 7-mm pupil size; and correlation of double vision with horizontal coma, glare with spherical aberrations and with total aberrations, and starburst with spherical aberrations for the scotopic pupil size. Scotopic pupil size had a positive association with starburst and a negative association with double vision.

 

 

CONCLUSIONS: The LADARWave wavefront measurement device is a valuable diagnostic tool in measuring refractive error with ocular aberrations in post-LASIK eyes. A strong correlation between visual symptoms and ocular aberrations, such as monocular diplopia with coma and starburst and glare with spherical aberration, suggest this device is valuable in diagnosing symptomatic LASIK-induced aberrations. Horizontal coma was correlated with double vision, whereas vertical coma was not.

J Refract Surg. 2006 Jan-Feb;22(1):48-53.  Hiatt JA, Grant CN, Wachler BS.  

Boxer Wachler Vision Institute, 465 N Roxbury Dr, Ste 902, Beverly Hills, CA 90210, USA.  

PURPOSE: To report the results of complex wavefront-guided LASIK retreatments.  

METHODS: Twenty eyes (15 patients) with histories of conventional LASIK surgery and significant visual complaints of glare and halos due to higher order aberrations were treated. Wavefront-guided retreatments were performed with the LADARVision CustomCornea system (Alcon, Ft Worth, Tex). Pre- and postoperative topographies, wavefront measurements, and subjective reports were analyzed.  

RESULTS: Postoperatively, patients had an expanded optical zone, many with improved centration. Lower and higher order aberrations decreased following wavefront-guided ablation. Mean higher order root-mean-square decreased from 1.01 +/- 0.25 microm preoperatively to 0.84 +/- 0.23 microm postoperatively. Mean coma decreased from 0.59 +/- 0.26 microm to 0.43 +/- 0.21 microm. Mean spherical aberration decreased from 0.66 +/- 0.25 microm to 0.54 +/- 0.27 microm. Subjective reports of glare and halo symptoms improved in all patients.  

CONCLUSIONS: CustomCornea wavefront-guided treatments are effective in reducing lower and higher order aberrations, expanding optical zones, and improving subjective reports of adverse aberration sequelae such as glare and halos.

NOTE: The abstract doesn't say how much tissue was ablated during the retreatment, and how much tissue remained under the flap. There is debate regarding how much needs to remain under the flap to prevent ectasia. Also, if you look at the decrease in HOA RMS, the numbers are relatively small, and it doesn't say at what diameter the scan was taken. (Taking a 6 mm scan on a patient with 8 mm pupils is like weighing a 250 lb. woman on a scale that only goes up to 175 lbs.) So the patients' subjective reports of "glare" and halos improved, but at what risk? Ectasia? Epithelial ingrowth? Flap complications? DLK? How much did it really improve? A small improvement would be great, but not at the long-term increased risk of ectasia (opinion).  One more thought, if pupil size doesn't matter, why did the expansion of the optical zone reduce the reports of "glare" and halo?

EyeWorld Weekly News
Volume 10, Number 44 November 28, 2005

http://www.eyeworld.org/ewweek.php?id=395#2

 

The optical zone/pupil ratio (fractional clearance, FC) has a significant impact on HOA induction after wavefront-guided LASIK, according to a study to be published in the December issue of the Journal of Cataract & Refractive Surgery. The study, “Influence of pupil and optical zone diameter on higher order aberrations after wavefront-guided myopic LASIK,” examined 27 myopic eyes of 19 patients. It was authored by Jens Bühren, M.D.; Christoph Kühne, M.D.; and Thomas Kohnen, M.D. Goethe University, Frankfurt am Main, Germany. They wrote that the ratio of optical zone to pupil was higher correlated with HOA induction after wavefront-guided LASIK than pupil diameter alone. The change in HOA root mean square and primary spherical aberration (Z 4, 0) was significantly correlated with FC, according to the study. If the optical zone [OZ] was 16.5% larger than the pupil (FC=1.17), only half of the amount of HOA is expected to be induced as if the OZ equaled the pupil, Dr. Bühren wrote. In contrast, an OZ that was 9% smaller than the pupil (FC=0.91) resulted in an HOA induction of 50% higher as at FC=1, according to the study. All patients underwent uneventful wavefront-guided LASIK using a Zyopix laser (Bausch & Lomb, Rochester, N.Y.).

FDA MDR on ALCON/Summit Apex Plus - pupil size issue

 

 

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=321365

 

Pt has undergone photorefractive keratectomy (prk) at hosp in a foreign country with a fda approved excimer laser, i. E. The apexplus of the co summit technology. The purpose of the treatment was correction of myopia which was determined as follows: -7. 3 diopters of myopia (d) and -1. 75 d of astigmatism on the right eye and -6. 8 d of myopia and -1. 5 d of astigmatism on the left eye. The treatment was performed with an ablation zone of 6. 5 mm. Up to today, at a distance of almost 5 years from the treatment, pt suffers from halos and glare and complains about bad vision at night. In order to collect more info about the device itself, rptr had a look at the documentation put on the internet and downloaded approval p930034 of 10/25/95, the only one that matched the device description and the date. Inside the documents rptr found some criteria which have to be met in order to ensure that the device is suitable for a certain pt. In the fda letter to summit of 10/20/95 rptr found under restrictions of use that the device is suitable for "moderate nearsightedness (-1.5 to 7.0 diopters when concomitant astigmatism is no greater than 1.5 diopters). ". In addition it is clearly specified as not indicated to correct high myopia (nearsightedness > -7.0 d). So, as mentioned above, the actual values of myopia and astigmatism exceeded the specified ones. As far as it regards the ablation zone rptr found an indication that the device was approved for a 6. 0 mm ablation area, while during the treatment a 6.5 mm diameter was used. So rptr's first question is whether there were amendments to the approval p930034. According to which the corrected values would have been inside an admittable range of new values or was the device used off-label ie outside the indicated limits. Rptr understood from the literature published before procedure date that the problems, pt is reporting, could be due to optical zone edge effects, especially when the pupil is dilated. Moreover i learned from the documentation, put on the internet, that large pupils have to be considered as a risk factor as far as it regards occurrence of glare and halos after refractive surgery. According to a survey, performed on pt in 10/99, the ablation was of good homogenity, it was perfectly centered and it had an usuable optical area of 4 mm on the right eye and of 4.5 mm on the left eye. Thus the dr stated on his report that the reason for the pt's problems has to be the pupillary diameter which is bigger than the treated area (rptr supposes he refers to the usable optical area and not to the abaltion zone). So rptr's second question is whether fda issued some specifications or amendments to approval which deal with long term risks of debilitating symptoms related to the pupillary diameter, its dynamics and the dimensions of the ablation area.

FDA Warning Letter To ALCON

http://www.fda.gov/foi/warning_letters/g5316d.htm

555 Winderley Pl., Ste. 200
Maitland, FL 32751

CERTIFIED MAIL

RETURN RECEIPT REQUESTED

WARNING LETTER

FLA-05-27

April 15, 2005

Mr. Gary A . Woodrell
Vice President
Refractive Manufacturing Operations
Alcon Laboratories, Inc.
2501 Discovery Drive
Orlando, Florida 32826

Dear Mr. Woodrell :

During an inspection of your establishment located in Orlando, Florida on January 10 - 18, 2005, our Investigator determined that your firm manufactures the LADARVision 4000 Excimer Laser System. An excimer laser is a device as defined by Section 201(h) of the Federal Food, Drug, and Cosmetic Act (the Act), [21 U.S.C. 321(h)].

The above-stated inspection revealed that this device is adulterated under section 501(h) of the Act, in that the methods used in, or the facilities or controls used for, the manufacture, packing, storage, or installation are not in conformance with the Current Good Manufacturing Practice (CGMP) requirements for medical devices which are set forth in the Quality System regulation, as specified in Title 21, Code of Federal Regulations (CFR), Part 820. Significant deviations include, but are not limited to, the following:

1. Failure to review and evaluate all complaints to determine whether an investigation is necessary. When no investigation is made, the manufacturer shall maintain a record that includes the reason no investigation was made and the name of the individual responsible for the decision not to investigate as required by 21 CFR 820.198(b). (FDA 483, Item #1).

Data downloaded from LADARVision systems currently in use in the U.S. showed significant differences in the retreatment requirements between patients treated prior to 15 minutes after calibration of the device as opposed to patients who were treated after 15 minutes following calibration of the device. Another table was provided that used the points of < 30 minutes from calibration to treatment and > 30 minutes or more from calibration to treatment.

A patient whose surgical procedure is initiated after 30 minutes has a 30% greater risk of retreatment than does the patient whose treatment commences prior to 30 minutes after calibration. Beam drift occurs if too much time passes between calibration and treatment, with possible translation or rotation of the beam.

Your response to this data has been inadequate. There is a note to a warning to the device user manual, which states, "WARNING: System calibration must be done between patients and within 15 minutes of surgery, failure to perform calibration in the time frame indicated may result in improper orientation of the ablation. " However, there was no reason provided to explain the use of these times. Moreover, the note to warning is not by itself sufficient to address the seriousness of this problem . (FDA 483, Item #1)

2. Failure to review, evaluate, and investigate any complaint involving the possible failure of a device, labeling, or packaging to meet any of its specifications, unless such investigation has already been performed for a similar complaint and another investigation is necessary as required by 21 CFR 820.198(c). Complaints received from January 1, 2002, through January 10, 2005, revealed the most common complaint codes as follows:

Class code - 801: Laser not firing,

Class code T 833: Translator malfunction,

Class code - 802A: Loss of tracking, and

Class code - 802B: Not able to track

Complaint records associated with these complaint class codes are not adequately reviewed, evaluated, and investigated to determine the root-cause of the system and/or sub-assembly component malfunction (FDA 483, Item #2).

Specific complaints reviewed during the inspection revealed the following:

a . Complaint Record RS030392 received on April 14, 2003, involving the LADARVision® 4000 Beta, lot number L4B1023S references the laser stopped firing during surgery at 92% complete. The Field Service Engineer (FSE) found arcing in the laser chassis assembly. The FSE adjusted components to prevent future arcing. The complaint record does not document and confirm that an investigation was conducted to determine the root cause of the reported problem. The record also fails to document the justification for not conducting an investigation and is not signed and dated by responsible personnel.

b. Complaint Record RS041106 received on August 23, 2004, involving LADARVision® 4000 Beta, lot number L4B1023S references the laser not firing. An FSE replaced the laser control electronics that failed. The replaced component was evaluated and verified the failure was caused by a broken connector. The record does not document and confirm that an investigation was conducted to determine the root cause of the broken connector. The record also fails to document the justification for not conducting an investigation and is not signed and dated by responsible personnel.

c. Complaint Record RS041047 received on August 11, 2004, involving a refurbished LADARVision® 4000 Beta, lot number L4B1090S referencing noise from the laser with a system failed error message. A similar complaint, RS030392 referenced a malfunctioning translator, which was replaced because of faulty/defective bearings. The complaint was classified as complaint class 823- Noise Coming from system. The complaint was more appropriately determined a translator malfunction, which is complaint class 833. The malfunction causes the laser to stop operating or firing resulting in surgery being terminated, causing under correction, which is not considered by your firm to be an injury.

d. Complaint Record RS030539 received on May 16, 2003, involving LADARVision® 4000 Beta, lot number L4B1022S referencing loss of tracking during surgery. Surgery was stopped at 57% complete. The FSE balanced the infrared pulse and changed the DSP gains. The record does not document an investigation that was conducted to determine the root-cause of the report to conduct an investigation into the reported malfunction.

e. Complaint Record RS031262 received on November 14, 2003, involving LADARVision® 4000 Beta, lot number L4B1022S references a laser unable to track. The FSE confirmed the failure mode and replaced the zoom motor. The Manufacturing Engineer (ME) confirmed that the motor performed erratically when operating under a torque and will not reverse direction when prompted by software. A similar complaint FS030539 (noted above) does not document that an investigation was conducted to determine the root cause for the zoom motor failure or the justification for not conducting an investigation into the malfunction.

3. Failure to promptly review, evaluate, and investigate any complaint that represents an event which must be reported to FDA under 21 CFR part 803 by a designated individual(s) and shall be maintained in a separate portion of the complaint files otherwise clearly identified as required by 21 CFR 820.198(d) and 803..50(b)(2).. (FDA 483, Item #3). Complaint .Record RS041447 received on November 5, 2004, (MDR 1061857-2004-00011) involving the LADARVision® 4000, lot number L4N1636S referenced the report of a poor clinical outcome. The primary custom-cornea, lasik procedure conducted on June 4, 2004, resulted in a two line loss of Best Corrected Visual Acuity (BCVA), 20/20 at pre-op and 20/30 at the four month post-op visit. A retreatment was conducted on October 29, 2004, resulting in an additional one line loss of BCVA, which was 20/30 at four months after post-op and 20/40 at one week after the retreatment post-op visit. No review, evaluation, and investigation were conducted of the primary custom-cornea lasik procedure on June 4, 2004. The retreatment procedure was reviewed, evaluated, and investigated, which is not covered under the system's labeling including the collection of data such as Operative Summary, LadarWave printouts, and Operative Reports. The complaint was closed December 13, 2004. No review, evaluation or investigation was conducted of the primary custom-cornea, lasik procedure which occurred on June 4, 2004.

4. Failure to establish and maintain procedures that define the responsibility for review and the authority for the disposition of nonconforming product as required by 21 CFR 820.90(b)(1). (FDA 483, Item #4). Your own procedures, specifically, SOP 7501-00.38, Field Returns, and SOP 7003-0909, Evaluation of Non-Conforming Parts Returned from Field Service, are not followed:

a. Complaint Record RS040448 - Per the referenced SOPs all parts replaced in the field are to be returned for evaluation. An evaluation of malfunctioning translators was not conducted as required and the service activity was considered routine maintenance instead of being assessed as a complaint.

b. Complaint Record RS040031 - Per the referenced SOPs gas filters were not returned for evaluation and an evaluation was not performed. This report was evaluated by Product Safety (PS) and classified as a "Malfunction". Personnel experienced headache, dry tight throat, and nausea resulting in an emergency room (ER) visit.

c. Complaint Record RS031155 - A FSE found a lead washer was unevenly crimped, which he replaced. The part was not returned and an evaluation was not performed. A MDR was evaluated by your PS team and classified as "Other" without explanation. Personnel experienced vomiting and nausea resulting in an ER visit.

The above-stated inspection also revealed that your device is misbranded under section 502(t)(2) of the Act, in that your firm failed or refused to furnish any material or information required by or under section 519 respecting the device. Specifically, your firm failed to report within 30 days whenever the manufacturer receives or otherwise becomes aware of information, from any sources, that reasonably suggests that a device marketed by the manufacturer has caused or contributed to a death or serious injury, as required by 21 CFR 803.50(a)(1).

The following complaints referencing serious injuries where not submitted within 30 days to FDA as required:

a. Complaint Record RS041329

b. Complaint Record RS030632

Your firm also failed to investigate adverse event reports and to evaluate the cause of the reported event as required by 21 CFR 803.50(b)(2). The following adverse event reports have not been adequately investigated as required:

a. Complaint Record RS030392

b. Complaint Record RS041106

c. Complaint Record RS041047

d. Complaint Record RS031262

e. Complaint Record RS030355

f.. Complaint Record RS031146

g. Complaint Record RS030632

h. Complaint Record RS031257

This letter is not intended to be an all-inclusive list of violations at your facility. It is your responsibility to ensure compliance with applicable laws and regulations administered by FDA. The specific violations noted in this letter and in the Inspectional Observations, Form FDA 483 (FDA 483), issued at the closeout of the inspection may be symptomatic of serious problems in your firm's manufacturing and quality assurance systems. You should investigate and determine the causes of the violations, and take prompt actions to correct the violations and to bring your products into compliance.

We have reviewed your response, dated February 3, 2005. We acknowledge that you have proposed to improve your complaint handling procedure. We would appreciate receiving the periodic reports that you have promised. Nevertheless, your response to the violations discussed above is inadequate because our review of the data shows that reviews, evaluations, and corrective actions were not fully assessed. Also your own procedures were not followed and misinterpretations were made as to the status of complaints that were reported and the conclusions that were drawn, which affected the corrective actions that were required. You should address each and every observation when responding to this letter. Your response has been made part of the Florida District file.

Additionally, no premarket submissions for Class III devices to which QS regulation deficiencies are reasonably related will be cleared until the violations have been corrected. Also, no requests for Certificates to Foreign Governments will be approved until the violations related to the subject devices have been corrected. You should take prompt action to correct these deviations. Failure to promptly correct these deviations may result in regulatory action being initiated by the Food and Drug Administration without further notice. These actions include, but are not limited to, seizure, injunction, and/or civil penalties.

Please notify this office in writing within fifteen (15) working days of receipt of this letter, of any steps that you are still in the process of taking to correct the noted violations, including (1) the time frames within which the corrections will be completed, (2) any documentation indicating the corrections have been achieved, and (3) an explanation of each step being taken to identify and make corrections to any underlying systems problems necessary to assure that similar violations will not recur.

Your response should be sent to Timothy J. Couzins, Compliance Officer, Food and Drug Administration,

555 Winderley Place, Suite 200, Maitland, Florida 32751

, (407) 475-4728.

Sincerely,

/S/ Emma R . Singleton

Director, Florida District

My thoughts: A letter written regarding B&L

For 14 years I was involved in the development of the MicroKeratome that were marketed by Bausch & Lomb. I had a great deal of experience with TLC when I worked as the service department supervisor for Bausch & Lomb. 13 years ago I started worked on the prototypes for the ACS MicroKeratome and 3 years ago I was there when Bausch & Lomb bought Hansa Research & Development Corporation, the true developer.

I was the production supervisor in charge of manufacturing parts up until May of 2002. I actually had a hand in the development of the ACS and Hansatome. I am probably one of the top 5 individuals with the most knowledge about its problems and shortcomings. I was discarded during restructuring in May as the local plant began a series of cutbacks.

About TLC? MicroKeratome returned for service from TLC were some of the worst kept medical devices imaginable. Dirty and beat up by a group of doctors that share equipment like you rent bowling shoes. The problem with a group of people sharing the use of delicate equipment is that nobody cares about its upkeep. Units were treated like tools, wrenches and screwdrivers, and tossed around like the toolbox in the trunk of your car. The people at TLC were the worst to deal with. Demanding quick fixes to destroyed equipment and the blame was always the equipment never the user.

Bausch & Lomb has now developed it's own more serious problems. In January of 2001 a new plant manager took over the facility here in Miami, Florida where the first MicroKeratome was built and where the Hansatome is produced.

From then till now that facility has undergone a series of cutbacks that affected quality and will be the end of the Hansatome project. That new manager had a personal falling-out with the previous manager and decided to replace the entire power structure of the facility to spite him. He has now done that by neutralizing 5 key people. Unfortunately for the project he has neutralized the supporting knowledge base. The people building Hansatomes were once surgical instrument makers and machinist. Now the device is built by housewives and teenagers in an assembly line production. You can figure out what happened to the quality.

Anyway this last year the production has gone down hill fast and here is a copy of my letter to the FDA in June, I fear they will not take is seriously. This facility needs attention.:

Bausch & Lomb Miami

The Bausch & Lomb facility at

7790 NW 55th St.

in Miami Florida is engaged in the production of the surgical instrument known as the Hansatome Micro Keratome. In this last year the quality of the product has deteriorated to a dangerous level. This effort to reduce cost, cut corners and implement assembly line type manufacturing has now out weighed the need to maintain quality, in this product that actually cuts the human eye. Actual patient injuries have occurred as a result of this effort to cut cost while boosting output. The Repair Dept. covers those tracks. Micro Rings and Micro Heads are being produced in volume without the necessary Quality Controls. The current Quality Manager is in the process of being replaced for voicing his concerns.

The rush to bring the new Z-Heads, Micro Suction Rings and the new 20MM Micro Suction Rings into production, was driven by Marketing and should have required a new 510(k). All other factors take a back seat to that need to hit the market with a new generation device. We are engaged in developing the new prototypes and at the same moment the plant manager is cutting resources. Reducing wages for supervisors and reduced hours for employees.

Reduced availability of tools and equipment. Cutting corners. Gages, measuring tools and cutting tools are in short supply. SPC is non existent and created after the fact as needed.

The design measurements and calculations for the calibration of the Z-Heads are flawed. The prototypes used in the clinical tests were re labeled
several times since they did not produce the expected results. They did not cut the correct thickness as predicted by engineering so the numbers on the heads were changed several times. The design was never reevaluated and under pressure from the plant manager the project pushed forward to production and product release in order to meet his timeline. The actual heads used in the clinical evaluation do not match the manufacturing drawings for the release.

Many small changes have gone undocumented in the effort to push forward.

This device is claimed to cause less compression on the flap when in fact it increases the compression of the entire eye and it is much greater pressure than the ACS unit. Several design changes have inched the Micro Keratome head closer to the eye increasing the IOP. So many Micro Heads were produced so fast that the documentation could not keep up causing heads with similar labels in inventory to have differing dimensions. This creates confusion when calibrating and installing these heads in new and service units.

The manufacturing process for Micro Suction rings and the new 20MM Ring has never been perfected even though production of the rings has increased. The development suffered from cutbacks. The FAIR's on the 20mm rings were done long after the rings were in clinical testing and were not done on the same rings used in the testing. On the Micro Suction rings, discrepancies in the measurements that control the exposure of the cornea above the ring have caused many Free Flaps as noted by the service department. Quality control in the manufacturing is lacking because of increased volume and cutbacks.

Many rings have varying dimensions. Defective rings are taken out of service or modified when found in service units.

There are massive across the board discrepancies in documentation of Prints, PCPs, SOPs and manufacturing procedures that are incorrect. Actual print dimensions are in error in many cases. This is made worse by cutbacks and restrictions in an effort to save money. GMP and ISO are the goals but the facility is in a state of disarray at this moment. The employees are working blind with an ever growing pressure by the manager to produce more volume in less time. When B&L bought this company 2 years ago documentation was minimal. Much of it was created immediately by a remote engineering department in many cases by people with no knowledge of the device. It was incomplete and flawed and in need of repair. In the last 2 1/2 years only small progress has been made in correcting the documentation and in the last year that correction process has been all but abandon. Procedures for such things as Part Machining, Assemble, Heat Treating, Hardness Testing and Servicing are in need of attention. These documents are incomplete and not understood by the employees. This is due to lack of resources, cutbacks in financing and personnel, lack of proper training and the unyielding pressure to produce more with less and to do it in less time.

Steve ____
X Production Supervisor Bausch & Lomb Miami

 

http://www.fda.gov/cdrh/pdf/p990027s004b.doc

e. Patient Symptoms

The occurrence rate for the symptoms dryness (22.6% vs. 10.5%, p<0.0001), gritty feeling (6.8% vs 2.6%), fluctuation of vision (14.7% vs. 5.7%, p-value = 0.0005), and variations of vision in dim light (18.1% vs. 27.9%, p<0.0032) were higher at the 6 month visit than at the preoperative visit.

Table 23

Patient Symptoms at Preop & 6 Months

All Treated Eyes

Patient Symptoms None Mild Moderate to Severe

% (n/N) % (n/N) % (n/N)

Preop. 6 Months Preop. 6 Months Preop. 6 Months

Light sensitivity 47.7% (167/350) 44.2% (121/274) 29.1% (102/350) 36.1% (99/274) 23.1% (81/350) 19.7% (54/274)

Headaches 68.6% (240/350) 84.7% (232/274) 19.7% (69/350) 12.4% (34/274) 11.7% (41/350) 2.9% (8/274)

Pain 89.4% (313/350) 92.0% (252/274) 8.3% (29/350) 6.9% (19/274) 2.3% (8/350) 1.1% (3/274)

Redness 75.4% (264/350) 71.9% (197/274) 18.6% (65/350) 20.4% (56/274) 6.0% (21/350) 7.7% (21/274)

Dryness 60.6% (212/350) 34.3% (94/274) 29.4% (103/350) 43.8% (120/274) 10.0% (35/350) 21.9% (60/274)

Tearing 76.3% (267/350) 88.3% (242/274) 16.3% (57/350) 9.1% (25/274) 7.4% (26/350) 2.6% (7/274)

Burning 77.1% (270/350) 77.0% (211/274) 19.4% (68/350) 20.8% (57/274) 3.4% (12/350) 2.2% (6/274)

Gritty feeling 77.4% (271/350) 67.9% (186/274) 19.7% (69/350) 25.5% (70/274) 2.9% (10/350) 6.6% (18/274)

Glare 59.1% (207/350) 49.6% (136/274) 28.9% (101/350) 37.6% (103/274) 12.0% (42/350) 12.8% (35/274)

Halos 82.0% (287/350) 73.7% (202/274) 11.1% (39/350) 16.4% (45/274) 6.9% (24/350) 9.9% (27/274)

Blurred vision 57.1% (200/350) 43.8% (120/274) 21.4% (75/350) 37.6% (103/274) 21.4% (75/350) 18.6% (51/274)

Double vision 91.7% (321/350) 82.5% (226/274) 5.1% (18/350) 12.0% (33/274) 3.1% (11/350) 5.5% (15/274)

Ghost images 92.3% (323/350) 78.8% (216/274) 4.9% (17/350) 16.8% (46/274) 2.9% (10/350) 4.4% (12/274)

Fluctuations of vision 70.0% (245/350) 38.3% (105/274) 24.3% (85/350) 47.1% (129/274) 5.7% (20/350) 14.6% (40/274)

Variation of vision in bright light 58.3% (204/350) 57.7% (158/274) 30.0% (105/350) 32.5% (89/274) 11.7% (41/350) 9.9% (27/274)

Variation of vision in normal light 78.9% (276/350) 63.5% (174/274) 16.0% (56/350) 29.2% (80/274) 5.1% (18/350) 7.3% (20/274)

Variation of vision in dim light 51.4% (180/350) 35.8% (98/274) 30.3% (106/350) 36.5% (100/274) 18.3% (64/350) 27.7% (76/274)

Night driving vision 43.4% (152/350) 59.5% (163/274) 38.0% (133/350) 29.6% (81/274) 18.6% (65/350) 10.9% (30/274)

N = Number of Self-evaluation Forms received with non-missing values at each visit.

At 6 months, the symptoms graded as moderate or worse that were reported at an incidence level of more than 1% higher than the baseline incidence level were redness, dryness, gritty feeling, halos, double vision, ghost images, fluctuations of vision, variation of vision in normal light, and variation of vision in dim light.

IntraLase Product Recalls

http://www.fda.gov/bbs/topics/enforce/2003/ENF00810.html

PRODUCT
Intralase FS Laser System. Laser Keratome. Recall # Z-1124-03.
CODE
All codes.
RECALLING FIRM/MANUFACTURER
Intralase Corp., Irvine, CA, by letters on July 15, 2003. Firm initiated recall is ongoing.

REASON
Gantry moves toward patient when 'Home' button is used after procedure.
VOLUME OF PRODUCT IN COMMERCE
70.
DISTRIBUTION
Nationwide and Japan.

http://www.fda.gov/bbs/topics/enforce/2002/ENF00767.html

PRODUCT
INTRALASE FS 600 C Laser System (Model 1), Laser Keratome. Recall # Z-0147-3.
CODE
All codes.
RECALLING FIRM/MANUFACTURER
IntraLase Corporation, Irvine, CA, by letter dated October 2, 2002. FDA initiated recall is ongoing.

REASON
Design defect, wire breakage, causes laser failure, interrupting surgery.
VOLUME OF PRODUCT IN COMMERCE
30 units.
DISTRIBUTION
Nationwide and Mexico.

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Search.cfm

Type in "Intralase" for the brand name to pull up MDRs filed on Intralase. The product code is GEX but you will get other reports not related to Intralase.

FDA Warning Letters to LaserSight Technologies (pdf format)

 

 

 

http://www.fda.gov/foi/warning_letters/m4234n.pdf

 

http://www.fda.gov/foi/warning_letters/m3669n.pdf

 

 

FDA MDR reports for problems/injuries by VISX laser

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/Detail.CFM?MDRFOI__ID=567146  

"Visx star 83 laser which had software to prevent "central island" complications did not prevent this complication in left eye. Pt was never told of this complication from original o. D. , or m. D. Surgeon. Pt did not find out about this complication until they went to another dr in 5/2003. Currently pt is trying to find a resolution to diplopia, and other retinal imaging issues caused by this laser and its software." To see more MDRs (Medical Device Reports) filed with the FDA on the VISX laser, go to the following link and type in "VISX" in the "Manufacturer" field and "LZS" for the "Product Code".

http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfMAUDE/search.cfm?searchoptions=1

http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?CMD=search&DB=pubmed

VISX Clinical Trials

Understanding pre-market approval and labeling differences of two leading customized ablation platforms: a call for reform at the FDA.

Wachler BS, Hiatt JA. J Refract Surg. 2004 Sep-Oct;20(5):S588-92. Excerpt from the full text:

VISX reported that 97.7% (84/86) of eyes had UCVA of 20/20 or better at 12 months. These 86 eyes represent only 24.5% of patients. Accountability is reported to be 95.6%, despite the fact that 70.7% (248/351) of patients were labeled “not yet eligible” for analysis at 12 months.

In the VISX trial, 13 eyes were excluded from the data analysis because they required retreatments (12 within the study, 1 outside the study) as these 13 eyes had UCVA of 20/32 or worse. Adding these eyes to the 12-month data, UCVA of 20/20 can be recalculated to be 84.8% of eyes (84/99) at 12 months; this is in contradistinction to the 97.7% reported with exclusion of these 13 eyes that saw 20/32 or worse without correction.

The addition of these 13 eyes still only accounts for 28.2% (99/351) of 12-month results from patients enrolled in the clinical trial; the refractive outcomes for >70% of the study population are not reported.

...on LASIK outcomes:

 

http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=15519085&query_hl=7



1: J Cataract Refract Surg. 2004 Nov;30(11):2336-43.

Macsai MS, Stubbe K, Beck AP, Ravage ZB.

Division of Ophthalmology, Evanston Northwestern Healthcare, Glenview, IL 60025, USA. This email address is being protected from spambots. You need JavaScript enabled to view it.

 

PURPOSE: To evaluate the effect of expanding the treatment zone of the Nidek EC-5000 laser on postoperative visual acuity as well as night glare and halos after laser in situ keratomileusis (LASIK) using 4 ablation zone diameters.

 

SETTING: Division of Ophthalmology, Evanston Northwestern Healthcare and Northwestern University Medical School, Glenview, Illinois, USA. METHODS: This prospective study comprised 301 eyes of 154 consecutive patients who had LASIK in 1 or both eyes using the Nidek EC-5000 laser by 1 surgeon with experience in keratomileusis and excimer laser refractive surgery. A 6.5 mm optical zone was used with a transition zone 1.0 mm larger than the pupil under scotopic conditions (7.5, 8.0, 8.5, or 9.0 mm). Targeted correction was calculated according to a customized clinical nomogram. All patients were queried about glare and halos preoperatively and 3 months postoperatively using a questionnaire assigning numeric values to the degree of perceived visual disturbance (0 = no glare or halos, 1 = minimal, 2 = moderate, 3 = severe).

 

RESULTS: The baseline uncorrected visual acuity (UCVA) was 20/200 or worse in 293 eyes. The baseline best spectacle-corrected visual acuity was 20/20 or better. The mean preoperative refractive sphere was -6.33 diopters (D) +/- 2.80 (SD) (range -1.00 to -16.25 D) and the mean preoperative refractive cylinder, 0.86 +/- 0.83 D (range 0 to +3.25 D). Three months postoperatively, 78% of eyes had a UCVA of 20/20 and 99%, of 20/40 or better. Preoperatively, 94 eyes (31%) had glare and halos. At 3 months, glare, halos, or both were present in 19 eyes of 11 patients (6.3%) (P<.0001); in 14 eyes, patients reported less severe glare and halos postoperatively than preoperatively.

 

CONCLUSIONS: The use of a peripheral transition zone 1.0 mm larger than the pupil under scotopic conditions resulted in a low incidence of glare and halos postoperatively and did not adversely affect visual acuity. There was no increase in postoperative complications including corneal ectasia.

LADARVision for RUINING HER VISION

SOURCE

The LADARVision® Tragedy: One Victim’s Story

As an ophthalmologist, Dr. Sandra Brown is acutely aware of what can go wrong when a surgical laser is applied to someone’s eyes. She waited a long time before consenting to laser eye surgery to correct her own flawed vision.

Her caution was well-placed. Few people realize that as many as 10% of all laser eye surgery patients are less than satisfied with the results. Many patients are scarred and left with permanent vision problems.

“It’s why I waited for the technology and the surgical procedures to improve,” says Dr. Brown. When a Fort Worth, Texas based company called Alcon, one of the giants in the multi-billion dollar eye care industry, announced the development of an “innovative laser radar tracking technology” called LADARVision®, Dr. Brown decided to take the plunge. She’s regretted her decision ever since.

A surgeon performed LASIK surgery on Dr. Brown in April 2001, using the LADARVision® Excimer Laser System. During the surgery, the laser performed erratically and removed too little tissue in an asymmetrical pattern from Dr. Brown’s eyes. As a result, she has sustained permanent damage to her eyes resulting in limited vision. The harm can’t be reversed by medical or surgical interventions. She has filed a lawsuit against Alcon.

"I specifically waited for the LADARVision® laser machine before having my surgery. For me, the wait cost me my vision,” says Dr. Brown. I will now have to live with the consequences because of a serious defect in Alcon's laser. When I started looking into my problem, I realized that I was not alone and many other people have likewise been hurt by this same problem," says Dr. Brown.

While horror stories associated with laser vision correction are not new, recent disturbing news about the Alcon LADARVision® laser may cause victims to consider whether harm to their eyes was caused by the laser and not doctors and medical staff.

“In the past, poor surgeries were usually blamed on the surgeon,” says Joel Fineberg, one of the attorneys for Dr. Brown. “There is now mounting evidence that the Alcon LADARVision® laser is at the heart of many of these problems.” Surgeons throughout the country are questioning the effectiveness of the laser.

In addition, an article authored by an Alcon consultant in the April 2003 issue of Opthalmology, reveals that patients treated with the LADARVision laser are twice as likely to need follow-up surgery. According to an investigative report in the London Times the rate of required retreatment might be even higher.

“Patients go in expecting to come out with clearer vision, and many times they come out with permanent damage,” says Mr. Fineberg. “What we have here is a company that has decided to ignore serious concerns raised by physicians about an obviously flawed product.”

Health News - Lasers or surgeons: What’s really the cause of high retreatment rates? - Published Saturday, January 1, 2005

Satisfied users of Alcon Inc.’s LADARVision excimer laser abound, but other surgeons are convinced retreatments were too frequent after they used the system.

READ MORE AT THE WEBSITE